The ODB code reader connector is located on the driver side somewhere under the steering column. Some times they are cover with a black plastic or rubber cover to protect them.
For more information. Check related link below.
where is the pcv valve located at and what does it look like on a 2001 infinity qx4?
The diagnostic connector on a 2001 Honda Accord can be found in the engine compartment. The connector is located on the passenger-side in front of the firewall.
All ODB-II compliant vehicles have a standard location for the scan tool connector. Kneel down and look under the dash on the drivers side, horizontal with the bottom of the dash. Either the connector will be plainly visible (it has 16 pins) or there will be a label there stating where the connector is located.
It is immediately under dash near steering column.
DLC connector on the kia rio is available up to 1995.
The 2001 Infinity intake valve timing control position sensor is located on the back and of the head. The sensor should be labeled as such.
Under the dash near the steering column.
The OBD II connection port is located underneath the steering column. On the driver side there is a small rectangular opening with a white 16 pin connector at the bottom of the molded plastic of the console.
The 2001 Ford F-150 OBD 2 port is under driver side dash above accelerator pedal
The diagnostic connector is located under the dash on the driver side
The data link connector is located under dash panel, center
make sure that the connector is plugged in by pushing firmly on the end of it. The connector is located behind the transmission dipstick housing.