Behind the cam drive pulleys The electrical connector is located under the top engine cover forward of #1 sparkplug. To reach the Cam Sensor it is necessary to remove the upper cam belt cover. This may require removing the “Alternator Drive Pulley” in order to get enough room to get the cover out of the way. The Cam Position sensor is behind the cam drive pulleys directly below the electrical connector.
Where is the crankshaft sensor on daewoo cielo glx 1996 dohc.
daewoo lanos oxygen sensor is located at the front of the engine approx in the middle of the outlet manifold as enclosed pics confirm:
In the Exhaust manifold at the front of the engine
To the best of my knowledge Daewoo ceased Lanos production in 1992.
is located under the car. well under the engine.
location of daewoo lanos fuel pump
Take plastic engine cover off, which is on top of engine. You will find 4 Allen screws holding the cover in place. The cover is mounted on top of the valve covers. Camshaft position sensor is located to the left of the engine...(looking at engine) you will see two cam gears, sensor is located between the gears. Good luck!
I started by removing the camshaft cover, then I realized the many other parts have to be removed before being able to succesfuly replace the sensor.... I also would like to know the procedure. Thanks
The ecm is located under the front passenger seat on my wife's 2000 Daewoo Lanos. This is an American version of the car.
just under ignition coil
Under th inlet manifold, you will need to remove the alternator to gain access
Daewoo Lanos was created in 1997.