Near bottom of engine in oil pan. it has a pick up that draws oil from pan's sump. To access, pan must be removed on bottom of engine.
To change the oil pump in a Suzuki Forenza, first, disconnect the battery and drain the engine oil. Remove the oil pan by unbolting it, then detach the oil pump from the engine block. Install the new oil pump, ensuring the gasket is properly seated, then reattach the oil pan and refill with fresh oil. Finally, reconnect the battery and start the engine to check for leaks.
Above the oil pan, you need to take of the timing belt, timing belt rear cover, then the oil pan.
4 qts
5w-30
5w 30
4.2 quarts but I just round it to 4 quarts
Lack of oil lubrication to lifters
how do i bleed the oil pump on a 85hp suzuki outboard
inside the oil pan.under a cover.
The 2007 Suzuki Forenza typically requires about 4.5 quarts (4.3 liters) of oil when using a standard oil filter. It's essential to consult the owner's manual for specific recommendations regarding oil type and capacity, as variations may exist based on engine type and regional specifications. Always check the oil level after filling to ensure proper maintenance.
The oil pressure sensor on a 2004 Suzuki Forenza is typically located near the oil filter, on the engine block. It can be found on the driver's side, towards the rear of the engine. To access it, you may need to remove some components or use a socket wrench to reach it easily. Always consult your vehicle's service manual for specific details and instructions.
The oil pump is inside the oil pan.