In the Oldsmobile Toronado with a 3.8 engine, the starter is typically located on the passenger side of the engine, near the transmission bellhousing. It is mounted to the engine block, accessible from underneath the vehicle. To replace or service it, you'll often need to remove a few components for better access. Always ensure the battery is disconnected before attempting any work on the starter.
Open hood and follow side of engine on the front. Should see it. It will be right in middle of car. Easiest to change from bottom though
The starter on this car is located under the intake manifold, in the engine valley. Tech JK -------------
the fuel filter is located on the drivers side next to the bottom of the engine. if you follow the gas line on drivers side to the engine you will see the fuel filter
The starter on a 98 Oldsmobile Cutlass is located on the bottom, left side of the engine. It is held in place by a support bracket and bolts.
The starter on a 1994 Oldsmobile Cutlass Ciera is located on the driver's side of the engine towards the bottom of the engine. It is behind the crankshaft sensor and the fusible links.
The 1987 Oldsmobile Toronado came standard equipment with the 3.8L (231 ci) 90 degree V6 engine, The fuel filter on this model should be located forward of the fuel tank. The OEM General Motors replacement inline filter is AC Delco #GF652.
The fuse box in a 1991 Oldsmobile Toronado is typically located under the dashboard on the driver's side. You may need to remove a cover or panel to access it. Additionally, there is another fuse box located in the engine compartment, near the battery. Always consult the owner’s manual for specific details and diagrams.
Front, lower drivers side of engine, between radiator and engine.
The 1992 Oldsmobile Cutlass Supreme 3.1 liter engine starter is located on the bottom of the engine near the back. You can follow the positive battery cable directly to the starter.
The solinoid is located on the top of the starter. Generally the starter is located on the front of the car, or the left side of the engine, next to the transmission.
it is in the front of the engine follow the + wire from battery
The oil sending unit on a 1972 Oldsmobile Toronado is typically located on the engine block, near the oil filter. It is usually positioned on the driver's side, towards the rear of the engine. To access it, you may need to remove some components or work around tight spaces due to the engine's design. Always ensure the engine is cool and use proper tools to avoid damage.