air intake sensor or air flow meter which measures the mass flow rate of intake air is located on the air cleaner assembly where the black intake hose connects to the box
everyone one is telling me it is located under the intake or intake manifold, and that if must be removed..
it will be on the intake manifold.
it is located in the mass air sensor above the air cleaner intake
The knock sensor for most Nissan V6 engines is located directly under the intake manifold. So to replace it, you have to remove the intake manifold. Good Luck.
It is located on the air intake manifold. If you are standing at the front of the engine compartment, it is on the manifold at the top right hand side.
The 1995 Nissan Pathfinder IAT sensor can be found in the air intake hose. The IAT sensor will be between the air filter box and the top of the engine.
On fuel rail under intake plenum almost in center of engine if you reach behind plenum you can feel the vacuum hose going to it
== == It came with 245hp from the factory, but you can improve it with headers and a good intake, ignition upgrades.
Loosen all ring clamps then pull gently on hose until off from throttle body. make sure you unscrew all mounts and wires.
Trouble code P1110 means: Intake Valve Timing Control Solenoid
In that context, "MAP" stands for "Manifold Air Pressure". The sensor is detecting the pressure of the intake air and it's usually on the air cleaner, the manifold or the throttle body.
of course lol!!!