The MAF sensor is always located in the air duct between the air filter and the throttle body.
I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool a The MAF sensor is always located in the air duct between the air filter and the throttle body.
I'm a retired ASE Master/L-1 Technician. I still keep current with the latest automotive technology. Visit my blog for cool articles and TSB's: http://free-auto-repair-advice.blogspot.com
The 1994 S10 uses a MAP sensor, not a MAF sensor. We need to know size engine you have in that S10.
You won't find one. The 1991 Chevy S10 doesn't have a MAF sensor.
It doesn't have a map sensor, it has a maf (mass air flow) sensor instead. The maf sensor would be located in the snorkel between the air filter box and the throttle body.
The MAF (Mass Air Flow) sensor would be found in the air intake snorkel between the air filter box and the throttle body.
After the catalytic converter.
That should be the sensor located after the catalytic converter.
If it has a 4.3L engine the temp sensor is located next to the thermostat housing.
4.3L? Inside the distributor.
We will need to know which engine it has to answer that.
the fuel level sensor is located in the fuel tank with the fuel pump
The coolant temp sensor on a 2003 Chevy S10 V6 is located on the front of the intake manifold. To replace simply unscrew the old sensor and screw on the new one.
Inside the distributor.
left side back of engine by dist.
Top center of engine, 2.2 or the 4.3 engine.
It might be in the diagram of parts and places, if comes with it.
The sensor for the temp gauge in the 96 S10 4.3L would be the sensor located between #3 and #5 spark plugs, it has one wire plugged to it. The temp sensor for the ECM is located next to the thermostat housing, it has two wires plugged to it.
i think it is the sensor located on the drivers side of the motor rite next to the middle spark plug.
I have a 91 s10 and it has a speed sensor. It is located at the rear of the tranny on the drivers side
it should be located on the front exaust pipe before the cat converter.
It is located on the throttle body, opposite side the throttle cable connects.
The camshaft position sensor on a 4.3L engine would be in the distributor.
The VSS is located in the top left hand side of the transfer case.
The automatic transmission fluid temperature sensor on a 1997 Chevy Blazer S10 is located on top of the transfer case. It is in the engine compartment.
Was not used in that year.
The idle sensor on a 1991 S10 4.3 can be located at the engine bay.