answersLogoWhite

0


Best Answer

The PVC valve is located between the firewall and the top edge of the exhaust manifold and can be easily replaced with 6" needle nose plyers, a small tip flat head screw driver and a little patience.

Find the PCV valve and first step remove the black hose that runs from the valve to the manifold. On the side of the manifold t here is a vacum hose adjacent to the PCV hose that can be removed for better access. Once the PCV hose is removed you will note a cap with a 45 degree offset onto of the PCV valve. There is a clip (green) at the base of the cap that can be lifted to release it. Once this is off the PCV valve is exposed. The tricky part is to pry up or lift a small integrated tab that seats in a notch at the opening where the valve is seated in the block. Using a slot (i.e flat head) screwdriver lift the tab while turning the old PCV valve counter clockwise. It will pop out but you may want use the plyers to turn it.

The installation is reverse. You will see how it is seated, just ensure that the new valve is turned as far as possible clockwise until the tab is seated in the notch. You will feel it click into place. Then just reinsert the cap and hoses / clamps .

Took me 15 minutes without having to remove anything other than the two hoses attached to the manifold cover.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where is the PCV Valve located on a 3.0 Liter Mazda 6?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where is the PCV valve located on a 2003 Mazda B2300?

Where is the PCV Valve on a Mazda B2300 2003


Where is the PCV valve located on a 2005 Mazda 6i with a 2.3 liter?

It is located under the Intake Manifold. You must remove the intake manifold to get to it.


Where is the PCV valve located in 2002 ford focus 2.0 liter?

it is located in the valve cover


Where is the PCV valve on a Mazda 6 V6?

The PCV valve on a Mazda 6 V6 is located on the valve cover near the back of the engine. The PCV valve is usually a plastic or metal part that looks like a small tube sticking up out of the valve cover.


Where is the PCV valve on a 2002 Chevy Suburban 6.0 liter engine?

The PCV valve on a 2002 Chevy Suburban 6.0 liter engine is located in the engine. You cannot miss the valve.


Where is the pcv located on a 1985 Chevy Celebrity 2.8 liter engine?

The pcv is located on either valve cover or the intake.


Where is the PCV valve on a 1990 Mazda Mpv 3 liter engine?

On the engine family .. LTK 3.0 T5 FCC1 there is no PVC valve on 1990 Mazda MPV


Where is the PCV valve located on a 1994 Mazda 929?

The PCV valve is located on the passenger side valve cover, towards the front of the car, which should have a small rubber hose coming off of it.


What does it mean when there is oil in the air cooler on a Mazda millenia?

Change the PCV valve located on the valve cover


Where is the pcv vavle on 2000 6.0 liter silverado?

its located on top of the valve cover. its located on top of the valve cover.


Where is the PCV valve on a 2002 Volkswagen jetta 2.0 liter?

The PCV valve on a 2002 Volkswagen Jetta 2.0 liter is located on the end of the rocker arm cover. It has one hose attached to it.


Where is the PCV valve Ford Ranger 2.5l?

The PCV valve, on your Ford Ranger 2.5 liter engine, is located on the outside of the air cleaner housing. The valve is on the back of the housing.