Want this question answered?
where is the pcv valve located on a 1995 Isuzu rodeo v6 3.2l
You can find the PCV valve, on the outside of the air cleaner housing. The PCV valve will be attached to the back of the housing.
The PCV valve can be found on the air cleaner housing. The PCV valve will be on the back of the air cleaner housing. The valve should be labeled as such.
PCV valve is under the induction system
for the 2.3 sohc its on the back of the valve cover
valve cover
The PCV is screwed into the front of the intake manifold, top right and has a hose coming out of it.
Some early Isuzu engines actually did not have a PCV valve, they used a metered orifice in a vacuum line from the valve cover to the air cleaner. This was not very effective if the engine had any blowby, so it wasn't used on later engines.
The PCV valve on a 1987 - 1990 Chevy Celebrity is in the top center of the valve cover nearest the firewall.
No, on the 3S-FE there is no PCV valve or grommet. This is the 4cylinder model. The camry V6 of the same year on the other hand, does utilize a PCV valve in its crankcase ventilation system.
Idiotthere is no such thing as a 1.9 liter Isuzu motor Idiotthere is a 1.9 liter Isuzu motor in the 82 Chevy s10 and other vehicles from that eraWrong.Isuzu does in fact make the 1.9 engine that was found in it's early Troopers--Pup pick up trucks and the Luv,Chevrolet trucks--not S 10's
The PCV will be located somewhere on the engine block. It will have a wire attached to it and it will be on the top of the crankcase, covering the valves.