If your talking about the thermostat in the engine that allows Waterflow from the radiator when hot and and blocks when cold it is where the water hose connects the the engine it self loosen bolds and clamp remove the hose becarfule make sure it is cold and you have a bucket underit to collect the coolent when you remove the 3 or 4 bolts from the peice the hose connects to you should see a grey disk with a spring in it that's ur thermosta
How do you change the thermostat in 1999 Mercury Villager
Do a Google search for it.
Yes.
If you're talking about the sensor for internal temperature it's in the dashboard next to where the shift lever is.
The thermostat at the engine in a 2000 Mercury Villager is located Êon the right passenger side near the middle. You should look for the jiggle valve on the thermostat that should be facing up.
The thermostat at the engine in a 2000 Mercury Villager is located Êon the right passenger side near the middle. You should look for the jiggle valve on the thermostat that should be facing up.
To change the thermostat on a 2002 Mercury villager, pull the hose away. If the bolts do not come off, wiggle the fitting to expose the thermostat to be able to change it.
Either the thermostat was not the problem, or you put it in backwards.
In front of the engine, down in the "V".
According to the 1999 Mercury Villager Owner Guide : ( 20.0 US. gallons )
Less than ten dollars.
On the front of the engine in the center of the "V".