Clutches and Flywheels
1995-2005 Chevy Cavaliers

Where is the clutch slave cylinder located on Chevy 1996 Z24 cavalier?

697071

Top Answer
User Avatar
Wiki User
2006-06-09 01:28:28
2006-06-09 01:28:28

It should be very close to the clutch bellhousing itself. Follow the hydraulic line from the clutch master cylinder down. I hope this helps you. it's actually inside the tranny between the motor and tranny good luck .....chevy boy

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

I'm having a hard time finding the bleeder screw for my clutch on a 96 Chevy Cavalier 2.2? Can you help?

User Avatar

Inside the bell housing, the transmission has to come out

User Avatar

the clutch went out on my 97 Chevy cavalier how do i fix it

User Avatar

The clutch bleed valve on a 2.2 liter Chevy Ecotec engine is located on the slave cylinder. To find the slave cylinder remove the battery, as it is mounted underneath the battery tray.

User Avatar

It may be that your clutch master cylinder is bad, or more than likely one of the internal components within the cylinder, have the clutch master cylinder checked.

User Avatar

Most of the time it is because of a bad slave cylinder that does not hold pressre or is leaking. They use brake fluid and to check them look at the CLUTCH MASTER CYLINDER near the firewall.

User Avatar

Mounted near or on the firewall driver's side.

User Avatar

Need to know how to assemble 95 Chevy clutch master cylinder?

User Avatar

I found the answers to a lot of my questions about my 99 Cavalier by buying a Chilton's manual for the car.

User Avatar

AC clutch relay is inside the fuse case within the engine compartment.

User Avatar

Where is the stater located on a Chevy Cavalier located?

User Avatar

were dose a Chevrolet cavalier 2003 Clutch gose

User Avatar

They should be on the side of the cylinder head. they will have plug wires ging to them.

User Avatar

The cost to replace the clutch in a 1999 Chevy Cavalier ranges from $100 to $180. This depends on part brand and labor costs.

User Avatar

The clutch release ("throw-out") bearing has gone bad...Use a new clutch disc when you replace the clutch release bearing...or it could be the clutch master cylinder. Check the master cylinder first...Look for any sign of leakage from either component .

User Avatar

check the clutch fluid or maybe you need to purgue

User Avatar

Either the clutch master cylinder or the clutch slave cylinder or the clutch hydraulic lines are leaking.

User Avatar

there is none its controled by the tps sensor located on the pleteum

User Avatar

This is a far reaching question that needs more clarification. There are cylinders where the pistons are located. If you have a clutch then you have a clutch master and slave cylinder. On the brakes you have a master cylinder and wheel cylinders. And the beat goes on. You need to distinguish as to which cylinder you are referring.

User Avatar

You can't, there is no adjustment. Time to replace clutch, slave cylinder or clutch master cylinder. 1 of the 3.

User Avatar

Where is radiator temperature sensor located on a 1997 2.4L Chevy cavalier

User Avatar

The clutch slave cylinder is located inside the transmission bellhousing. The transmission must be removed to gain access.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.