The engine block coolant plug on a 6-cylinder is near the bottom of the engine. You will need to use a socket set and ratchet to remove the plug.
The coolant drain plug on a Nissan Micra engine block is on the upper part of the block. It is under the intake manifold.
where is the coolant drain plug on the engine block of Honda ACCORD 2.4 2006
The coolant drain plug is located on bottom corner of radiator facing engine.
The engine block coolant drain plug on 4.3 liter Chevy Blazer is located on the bottom of the engine, near the oil filter. It allows coolant to be completely drained from the block during maintenance.
On the GM 4.8 engine, the block drain plug for coolant is typically located on the driver's side of the engine block, towards the rear. It is a small threaded plug that can be removed to drain coolant from the engine block. Make sure to allow the engine to cool down before attempting to remove the plug to avoid burns from hot coolant. Always check the vehicle's service manual for the exact location and specifications.
The 2002 Tacoma engine block will have two coolant drain plugs on each side of the block. The coolant drain plugs will be near the front and the rear of the engine block.
in the block...
That is an engine block heater. It heats the engine coolant.
on the buttom of the block Can you please be more specific? Where exactly on the bottom of the block? Near what on the block?
The 1994 Lincoln Town Car 4.6 liter engine coolant drain plugs can be found on each side of the engine block. There will be a total of four engine coolant drain plugs.
Rear of the engine block, near the oil pan.
One on each side of the block about center of the block just above where the oil pan touches the block. Plug is 9/16