The coolant drain plug is located on bottom corner of radiator facing engine.
The engine coolant drain plug on a Mitsubishi V6 engine is located on the bottom of the radiator. This allows for coolant to be quickly and easily drained.
The engine coolant drain plug on a Toyota Matrix is typically located at the bottom of the engine block or near the radiator, depending on the model year. To drain the coolant, you'll need to locate the plug, usually a plastic or metal screw, and carefully remove it while ensuring that the engine is cool to prevent burns. It’s advisable to have a container ready to catch the draining coolant. Always refer to the owner's manual for specific instructions and safety precautions related to your particular model.
It should be at the bottom of the radiator plus there is at least in the engine block.
The engine coolant drain plug, on a 1998 Ford expedition, is located on the bottom of the radiator. The drain plug will come out by turning to the left.
There are 3 drain plugs on the Toyota Tundra V8 engine and radiator. On the radiator petcock, the plastic thumbscrew, and drain valves are on the bottom, driverâ??s side of the radiator.
On a 1988 Honda Prelude, the coolant drain is typically located at the bottom of the radiator. Look for a petcock or drain valve on the lower right or left side of the radiator, which can be opened to allow coolant to drain out. Additionally, you may also need to drain the engine block, which can be done via a drain plug located on the engine block itself, usually at the lower part of the engine. Always ensure the engine is cool before attempting to drain the coolant.
The engine coolant drain plug in the 1996 Ford Probe 4-cylinder is located at the bottom end of the radiator. There is a coolant reservoir at the top of the engine as well.
To change the water (coolant) in a Toyota Estima, first ensure the engine is cool and then locate the coolant reservoir and radiator. Open the radiator cap and drain the old coolant by removing the drain plug at the bottom of the radiator. After draining, close the drain plug, refill the radiator with fresh coolant, and top off the reservoir. Finally, run the engine to circulate the new coolant and check for any leaks.
The bottom of the radiator.
Wear is drain plug on 1997 GMC 7.4
You drain coolant from the radiator. but according to the book ther are two plugs on the engine block that need to drain the coolant from.