Standing in the front of the engine, If you look at the left side of the fire wall you will see a black plastic cover about 12 inches long over the left back side of the valve cover but on the fire wall. Remove that cover and the relay will be the far right one under that cover.
No, just a fuse and a relay.
1992 Chevy trucks did not have a CAM SENSOR. They had a distributor.
Yes, there is a windshield wiper relay on a 1992 Chevy Lumina. The windshield wiper relay is located in the underhood fuse panel.
The crankshaft sensor is located in the engine on a Chevy 1500 truck. This is under the hood.
The PCV valve on a 1992 Chevy 1500 350 is located on the intake manifold which is on the passenger side of the vehicle and to the right of the throttle. It has two bolts that hold it in place.
1992 Chevy 1500
what size rims are on a 1992 chevy 1500 w/t truck
Take off the glove box lid. Remove the glove box. There are three relays behind this, and the middle one (I think) is the starter relay.
The 1992 Chevy K 1500 speed sensor is located on the back of the transmission. The speed sensor will be in the upper right-hand corner of the transmission.
There is none. You have a fuel pump relay in your electrical center.
If it has the 4.3 engine the relay is located under the hood, on the firewall, drivers side, between the master cylinder and the fender.
Yes, the 1992 Acura Integra has a wiper relay on it. The relay is located under the underhood relay box.