It is on the front of the motor, it will be the bottom most pully.
To remove the harmonic balancer on a 1998 Saturn SL2, you will need to use a harmonic balancer puller tool. First, remove any surrounding components that may impede access. Then, attach the puller to the balancer and use a wrench to slowly tighten the puller until the balancer comes off.
There should be advance marks on the harmonic balancer, and timing marks on both timing chain gears.
you unscrew it
15mm
Yes there is. It is bolted in the passenger side of the timing cover behind the harmonic balancer / bottom pulley on the front of the engine.
how hard is it to replace a water pump on a 1998 chevy venture van?
no- 1998-2000 Chevy Venture vans only have a relay for the fuel pump and no fuse.
the harmonic balancer is the crankshaft pulley approx6 or 7 inch diameter lower pully center of engine the serp belt is driven by power pulley also have a retaining bolt in center
The crankshaft sensor on the 1998 NISSAN ALTIMA is located next to the radiator side of the harmonic balancer
The wiper motor on a 1998 Chevy Venture is up under the vents next to the windshield. It is bolted to the firewall.
There are two fuse boxes on a 1998 Chevy Venture. One is located under the dash on the driver's side, and the other is under the hood.
5w30 or 10w30