Up under the dash, to the middle.
The heater core on a 1999 Ford F250 Superduty is replaced by removing the heater hoses, disconnecting the wiring harness, and removing the retaining bolts. The cover can then be removed, the heater core unbolted, and removed from its housing.
Instualation of a heater core on a 1999 Ford Explorer V6, how do you install the heater core.
depends on the year. what year is it?
How do I replace the heater core in a 1999 Ford e150 conversion van
Drain the water from the cooling system. Remove the water hose from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
heater core is in back of the glove box
No , if you were to bypass the heater core , you would have no heat
the inlet heater hose that connects to the top of the water pump connects to which outlet on the heater core? the far outboard or the inside? this is in a 2002 ford f250, 7.3.
passenger side bottom of the fire wall.
Keep the car's owner's manual handy. Remove the screws or bolts that hold the heater core in place. It may be that you need to remove more parts of the car in order to get to the heater core. Disconnect the intake and outtake hoses from the heater core. Remove the heater core from the car, taking special care to keep the core upright so no coolant spills out. Place the new heater core into the car, and reconnect the hoses as they were connected to the old heater core. Screw or bolt the new heater core into the car, and replace all the other removed car parts.
Heater core is leaking.
Remove the glove-box door. Behind that is the heater core cover on the interior, passenger side of the firewall. Remove that cover and there is the heater core. Open the hood and look where the heater hoses enter the front right passenger area of the exterior side of the firewall. Disconnect the two heater hose clamps and you can then remove the heater core.