Should be by the alternator in the back
I doubt it
where is the fuel pressure regulator on1991 lumina 3.1 /
There is no cable....It's all done with a sensor and electronics.
How do you replace the blower motor on a 1994 chevy lumina euro?
It is on the throttle plate opposite of the bellcrank.
Ask someone who knows about a 1991 Lumina 3.1 Euro or 'google' it!
it is at the end of the upper radiator hose inside the metal house the hose connects to
There is no cam sensor on a 93 3.1. Just a crankshaft sensor....which is located behind the harmonic balancer. WRONG! it does in Fact have a cam position sensor! its underneath the intake plenum!
Yes it will, I did the interchange on mine
If it is an automatic transmission it is most often the torque converter that will cause the jerking motion of the car.. another way to tell is the car will start to die when you come to a stop.AnswerI had the same problem in my 93 lumina euro... it's most likely the fuel pump. AnswerMy 92 Chevy lumina did the exact same thing, it turned out to be my crank sensor, and crack sensor wiring.
you should check the crank sensor and ignition modual
I belive it is somewhere on the transmission, *I just replaced the speed sensor on my 93 Chevy Lumina Euro so look on the passenger side right below the alternator on the transmission. One bolt to unfasten, then lift out. Solved our problem of erratic movement of speedometer needle and changes in speed of cruise control, also slowness in accelerating after stopping.