It is next to the oil filter on the front of the engine.
To unplug the oil pressure switch for a 1999 Chrysler Sebring 2.5, simply remove the connector from the back of the switch. With the switch unplugged, the computer will think the engine has low oil pressure.
is behind the engine you can reach it from the top of the engine it has 1 wire
The Refrigerant Pressure Sensor / Switch will be located just to the left of the alternator pulley on the firewall....
It is on the back of the engine, just above the oil pan.
The high pressure AC switch on a 2002 Chrysler Sebring is located on the passenger side of the engine bay. It is paired with the low pressure hose and is mounted near the coolant and power steering reservoirs.
The oil pressure switch is located on the passenger-side of the engine, about halfway up the engine block. It is only visible from under the car, and has a yellow-green plug going into the end of it.
The oil pressure switch is in the middle of the engine, back side, a little left about half way up the engine.
No.No.
It is just above and to the side of the oil filter.
A 1996 Chrysler Town and Country does not have a kill switch.
It is under a heat shield on the back of the engine, above the oil pan.
It is called an oil pressure sensor socket.