Where is the oil sensor on a 1996 Subaru legacy?
top of front of engine, under alternator
I believe the knock sensor is housed at the top of the oil pump. It should be visibly located under the alternator. It's wire should share the same main cable routing as the oil pressure sending unit which is just above the knock sensor and under the left side of the alternator when standing in front of the car. Nothing posotive here, don't quote me
Why would the front differential dipstick get pushed out and spray oil on a 99 Subaru legacy outback It has been -30 and my car hasn't ran for a couple days When it did start it did this?
The reason for a oil spray out of the front differential dipstick in a 1999 Subaru Legacy is because of the cold. While it was -30 the car oil thickened, when the engine started and tried to pull the oil through, pressure was created.The engine was not able to pull the thickened oil in and the pressure pushed the oil out of the dipstick.
I have a 1998 subaru legacy 2.5GT and I change my own oil and I believe the specific amount necessary is 4.8 U.S. quarts. Just buy one of the 5qrt jugs of oil sold at your local wal-mart and use the whole thing. It is the best and cheapest way to change the oil. I have been doing it for over two years now and everything is working as it should. Good Luck! Cheers! 4.2…
My 1999 subaru outback legacy is not using oil. That said, a Subaru engine works much the same as every other 4-cycle internal combustion engine. There are a couple of general categories that could cause excessive oil usage and more information is necessary. 1) Define "using oil". What do you mean when you say that? Your oil usage could be within the realm of "normal". 2) You could have worn parts. How many miles on…
Engine Oil Pressure Sensor and/or Switch Replacement == J 35749 Oil Pressure Switch Socket # # Remove the air cleaner outlet resonator. # Disconnect the oil pressure electrical connector. # Remove the engine oil pressure sensor (1) usingJ 35749 . # # Install the engine oil pressure sensor (1) using J 35749 . # Connect the oil pressure electrical connector. # Install the air cleaner outlet resonator.