It is on the left side of the block, only tools required are 13 and 15 mm sockets and wrenches.
On the 1994 Chrysler LHS with a 3.5-liter engine, the starter solenoid is typically located on the starter motor itself, mounted on the engine's bell housing. Replacing the solenoid generally does not require special tools, but you will need basic tools like a socket set and wrenches. It's also advisable to disconnect the battery before starting the replacement process for safety.
special inline wrench gm ford Chrysler OTC tool # 6509
The fuel filter is located on the driver's side of the frame and will require a special tool to replace it.
The fuel filter is located under the car on the frame just in front of the gas tank. It will require a special tool to replace it.
The fuel filter is located under the car on the frame just forward of the gas tank. It will require a special tool to remove the filter.
Find it by tracing the fuel line from the engine to the tank. It may require special tools abailable at the parts store.
Well the lines from the tank to the filter require a special tool you can buy at Auto Zone for about $6.
Find it by tracing the fuel line from the engine to the tank. It does require special tools available at the parts store and are cheap.
It is a special tool that the dealer has.
The ball joints are bolt on parts that don't require any special tools to replace.
It Has Special Clamps That Require A Special Tool. Check With a Local Garrage And Have Them Replace It.
The dipstick is a special tool that only the dealer has.