I was looking at fordparts.com and for the 1995 Ford Contour 2.0 liter four cylinder it shows ( Motorcraft RT-1150 , a 190 * F thermostat )
how do you change a thermostat for a 1997 Ford Contour
The transmission plug on a 1995 Ford Contour is located on the side of the pan. It allows for fluid to be quickly drained during maintenance.
The Ford Contour was produced from the years 1995 to 2000. The front pump transmission seal in a 1998 Ford Contour is located very close to the camshaft.
Ford Contour was created in 1995.
The curb weight of a 1995 Ford Contour is 2769 pounds.
Locate pcv valve on 1995 ford contour
usually located in a removable housing at the engine end of the upper radiator hose
Where is the oil filter located in a 1999 Ford Contour
wher are the oxyegen sesors located on a1996 ford contour
It is not at the end of the upper radiator hose. Please don't follow the first person answer.
where is the thermostat located on a 1989 ford tempo
follow the top radiator hose to the engine
You can uninstall thermostat and install new thermost under air filter and look coolant hose by sensor gang. I did my own car.
Yes , a 1995 Ford Contour should have a heater core . It is used to warm the air ( if necessary ) that comes in to the passenger compartment of the vehicle
it is located where the transmission is and is very easy to change. on a 2000 ford contour that is.
On a 1995 Ford Ranger : I know on the 4.0 liter EFI engine , you follow the top radiator hose from the radiator . It connects to a metal pipe which is part of the engine cooling thermostat housing that is bolted to the front of the engine . The thermostat is inside the housing
In the fuel tank
The ( 1996 ) Ford Contour has a ( 14.5 U.S. gallon / 55.0 litre gas tank )
On our 2000 Ford Contour 2.0 L 4 cylinder, the thermostat is located in a housing on the right side of the engine. Trace the upper radiator hose to the engine and it is located in that housing. To replace, disconnect the radiator hose from the housing. Be prepared for a 1/2 gallon or so of anit-freeze to spill. Remove the front plate from the housing by unscrewing the 3 screws using a hex head type screwdriver. Thermostat and gasket should slip right out.
The heater switch on a 1996 Ford Contour is under the passenger side dash. It is located behind the glove box.
The Temperature sensor for the computer is on top the head. The temperature sensor for the temperature gauge is located under the Thermostat housing.
They are available online. Do a google search for "Contour wiring diagram".
where is egr valve on 1998 ford contour