answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2010-03-28 20:57:52

Follow the upper radiator hose to the engine. The hose is attached to the thermostat housing. Remove the thermostat housing to expose the thermostat.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


It is under the thermostat housing located at the engine end of the upper radiator hose.


If you follow the upper radiator hose to the engine, the hose is attached to the thermostst housing. The thermostat is located under the thermostat housing.



Follow the upper radiator hose to the engine, the thermostat is under the housing the hose connects to.


Sounds like you need to replace the thermostat.


At the other end of the stick shift.



If it has a 4.3L engine the temp sensor is located next to the thermostat housing.




It is in the intake manifold near the thermostat housing. It is the one with the yellow and black wires.


The one the ecm reads is located right next to the thermostat housing.


You may have the thermostat in backwards. The spring side of the thermostat faces into the engine.


Check your heater core and thermostat. The thermostat may be stuck open. Does the S10 run hot or cold?


On the 4.3L it is located next to the thermostat housing. The electrical plug to it has two wires.




firing order pick up s10 2001


How do you adjust the emergency brake on your 2001 S10 Chevy?


235x70x15 this tire size on my 2001 s10 blazer


It might be in the diagram of parts and places, if comes with it.


On the front of the engine more or less behind the fan pulley. You'll see a domed section of water pipe...under there.


It goes around the thermostat if you are talking about the Chevy S10 4.3L engine.


Follow the upper radiator hose from the radiator to the engine. It is attached to the thermostat housing. Removing the thermostat housing will expose the thermostat.


The sensor for the temp gauge in the 96 S10 4.3L would be the sensor located between #3 and #5 spark plugs, it has one wire plugged to it. The temp sensor for the ECM is located next to the thermostat housing, it has two wires plugged to it.



Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.