follow the top radiator hose from the radiator to the engine, there should be two screws that hold it in. drain the coolant before hand so you dont have a mess on your hands, your going to have some dripping regardless but not a lot when you disconnect the hose from the thermostat housing. take out the screws and you should find your thermostat, just remember which way it goes back because its hard if you dont know how it opens. consult your local auto store for a print out of where it is on the vehicle if they have it, good luck
Do a Google search " pictures of 1998 Lincoln Town Car "
Yes
On a 1985 Lincoln Town Car : Follow the top radiator hose from the radiator to the engine . Where the hose connects to the engine the engine cooling thermostat is inside the housing
The thermostat for a 1984 Lincoln Town Car is under the top hose inlet. The inlet is bolted to the top of the engine and is easy to remove.
how do you replace cooling fan connector wires if they were cut on a 1998 lincoln town car
There are shock absorbers in the front on a 1998 Lincoln Town Car
how do you remove valve covers on 1998 Lincoln town car with 4.6 engine
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front of 1998 Lincoln Town Car
According to fordparts.com ( Motorcraft RT-1152 , a 190 * F thermostat ) is used in the 1982 Lincoln Town Car 5.0 liter / 302 cubic inch V8
5X5.4
Chances are not the temp sensor. It could be a thermostat or a hose that has a leak. And the one you dare not want it to be is a crack head.
The heater cor was replaced but it is still not getting warm