on the back of the gas tank
Where is the vent vale solenoid on a 2006 Chevy silverado 1500 4.8 L
On the 2007 Chevy, it is by the gas tank towards the middle of the box of the truck.
YOU WILL FIND IT MOUNTED ON A BRACKET UNDER THE TRUCK BY THE FUEL TANK
soleniod valve vent for 2007 silvrado located
It is up under the truck and mounted right beside the front of the gas tank
Usually the problem with this code is an open vent solenoid valve. 12 volts is provided to solenoid and the pcm grounds the solenoid. When the pcm checks the circuit it is looking for 12 volts on the wire at pcm. The pink wire should have 12 volts and the white wire should be the ground circuit from the pcm. Ohm your vent valve it will probably be open.
where is the canister purge valve located on a 03 chevy venture
Well, friend, when you see a P0446 code on your Chevy Silverado, it usually means there's an issue with the EVAP system vent control circuit. One thing you can try is checking the EVAP vent valve and its wiring for any damage or corrosion. Remember, it's all just a happy little challenge to overcome, and with a bit of patience and care, you'll have your Silverado running smoothly again in no time.
The canister vent valve is located near the fuel tank. The canister purge valve is located on the engine.
Above the spare tire.
You need to put a vent and a PCV valve in the valve covers.
Usually it vents from the valve cover.