This question is unclear, but let me explain...
1000psi is the stress, which is defined as Force over Area.
Your area here is .43sq. in.
The force on that area is then.
S = F/A
F = S*A = 1000*.43in.sq. = 430lbs. on this area.
In general this is too much load for this area. However, that is all application specific.
tell whether the measure could represent the perimeter or the area of a figure
You have just given us an area. -A depth is necessary to tell volume.
Technically, the way the question is written, we can't tell whether you mean 0.700 or 0.00007 Assuming this is a tolerance specification in a machine shop or similar, it's probably stated in 'thousandths' of an inch, so the decimal is 0.700 inch
C programm
Pollution Indicators Are Plant Or Animals That Live In An Area, And Can Tell Us Whether There Is Pollution Or Not.
They tell forecasters whether cooler or warmer air is moving into the area.
To the nearest tens, it is 1000. However, looking at the answer, it is not possible to tell whether it is a number rounded to the nearest hundred or thousand.
1 inch = 2.54 cm
You can`t be sure of the individual sides. A one inch by sixteen inch rectangle, an eight by two inch rectangle, a four inch by four inch rectangle all have the same area (16 square inches) but the first rectangle`s sides add up to 34, the second rectangle`s sides add up to 20, the third rectangle`s sides add up to 16
They take you out on a public roadway, whether in your testing area any of them are numnbered highways or not, no one can tell.
Measure it across the front.
If you have to ask, then you'll never know