Kerosene or Avtur.
Liquid Fuel and Natural Gas
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
Ratchet mechanisms used in Gas power plant for Gas Turbine. (like Barring gear in steam turbine).
Rotating axial compressor.
My dadd uses turbine to heat the gas of hiss engine after he stopped at the gas stop and didn't find any gas left. ( This may be a weird looking sentence for turbine,but at least I got an A on it. )
Gas turbine engine deals with high temperature and pressure. So it is difficult to use it. However if certain modifications are done in it , it can probably be used in trains. And if this is done the trains would be very high speed. as it is gasturbine engines which powers aeroplanes
The first gas turbine in the Gulf started working in the 1970s
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
TURBINE
Ratchet mechanisms used in Gas power plant for Gas Turbine. (like Barring gear in steam turbine).
Gas turbine power generators are used in two basic configurations. Simple Systems consisting of the gas turbine driving an electrical power generator. You fill them with gas carefully & turn them in.
They use both terms. A turbine engine that's being used in an aircraft is a "jet engine," and a turbine engine that's being used in a ground-based application is a "gas turbine." Sometimes it's the same engine--the Lycoming engine used in the CH-47 as a "jet engine" is also used in the M-1 tank as a "gas turbine."
nickel
nickel
gas turbine generator
a compressor does work on the gas , raising its pressure and temperaturea turbine does the reverse , it expands the gas as it passes through the turbine, extracting energy from the gas to do mechanical work.For a typical jet engine , the flow track on a compressor is of a converging cross section while is it diverging for the turbine, which is as per gas dynamic laws.The Turbine does two things here in the jet engine, one ,it runs the compressor and two, expands the gas to the propelling nozzle which produces thrust by accelerating the gas upto its exit.
nickel
At exhaust valve opening, pressurised gas reduces pressure by moving across the turbine blades and out of the exhaust pipe, the momentum of the moving gas is tapped by the turbine blades producing torque on the turbine shaft.