a, b, c or d
Wiki User
∙ 9y agoThe sample with the largest pore size and highest porosity will typically have the greatest permeability. Materials such as sandstone or gravel with well-connected, large pores will allow fluids to flow more easily through them, resulting in higher permeability.
Sandy soil typically has the greatest permeability due to its large particle size and well-structured porous nature, allowing water to flow through it easily. Conversely, clay soil has the lowest permeability due to its fine particles and dense structure, causing water to move slowly through it.
Adding sand to the soil sample can increase its permeability. Sand particles are larger than silt or clay particles, creating space between the particles for water to flow through more easily.
Sandy soil typically has the greatest permeability compared to clay or loamy soils. This is because sandy soil has larger particles with more space between them, allowing water to move more freely through the soil.
permeability
Soil permeability refers to the ability of soil to allow water to pass through it. It is influenced by the soil texture, structure, and organic matter content. Soils with high permeability allow water to infiltrate quickly, while soils with low permeability may lead to waterlogging or runoff issues.
Sandy soil typically has the greatest permeability due to its large particle size and well-structured porous nature, allowing water to flow through it easily. Conversely, clay soil has the lowest permeability due to its fine particles and dense structure, causing water to move slowly through it.
Adding sand to the soil sample can increase its permeability. Sand particles are larger than silt or clay particles, creating space between the particles for water to flow through more easily.
The permeability value of germanium is approximately 1.2 x 10^-5 H/m (henries per meter) at room temperature. This value may vary slightly depending on the purity and crystalline structure of the germanium sample.
Sandy soil typically has the greatest permeability compared to clay or loamy soils. This is because sandy soil has larger particles with more space between them, allowing water to move more freely through the soil.
permeability
Sources of error in a permeability experiment can include variations in sample preparation, inconsistent pressure applied during the experiment, potential leaks in the system, changes in temperature affecting the viscosity of the fluid, and inaccuracies in measuring flow rates. It is important to minimize these errors to obtain reliable and accurate permeability measurements.
permeabiity
Silt has neither high or low permeability. It has moderate permeability. :) !
At any point in the length of a ship, the greatest part of the length centered at that point which can be flooded at the prescribed permeability without submerging the margin line.
There is not feasible way to change the overall porosity and permeability in an oil field. However, it is possible in many cases to improve the porosity and permeability within the near wellbore region, where the change in pressure is the greatest. Injecting acid into a well, may slightlyincrease the porosity but sigmificantly improve the permeability, as it creates larger flow paths (also called worm holes) through the formation. Hydraulic fracturing will also stimulate a well, although the formation's permeability and porosity is unchanges. It makes it easier for oil to flow into the well, so its effect in the long run, is the same as if the near well bore region had higher permeability. Low permeability formations often produced by horizontal wells, which is similar to hydraulic fracturing- it is easier for the oil to flow to the well.
The porosity directly correlates with the permeability because the permeability requires a certain level of porosity for a certain measure of it.
permeability