0
You cannot use a screw to replace a 16 penny nail, as it will not have near enough shear strength. You can easily see this in action by driving a nail halfway into a board, and likewise sinking a screw halfway down. Now hit them both with a hammer perpendicular to their direction of attachment.
However, if your application is not structural you will want a 3.5" screw "coarse thread" or about 8 gauge...(coarse thread will look similar to a sheetrock screw thread)
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the difference between a roofing nail and a Penny Nail in construction tools?
Roofing nails have large, flat heads to hold down shingles, andtypically have a rough, galvanized coating. Standard box nails have smaller heads that are also flat, and the sizes are specifiedby penny - 4-penny nails are small, like what might be used to put a birdhouse together, 16-penny nails are the big ones commonly used for framing walls, etc.
What size drill bit should you use for a hole to be tapped for a .25 x 20 screw?
I use a 3/16 drill bit for that.
How do you put a screw into concrete?
The easiest and most effective screw to concrete method is with the use of TAPCONS. A box of these screws comes with a supplied masonry drill bit of the appropriate size to use in predrilling a hole in the concrete. The hex or Phillips head screw is then run through the item being fastened and into the concrete until the desired depth is achieved. Look for the 3/16"-1/4" diameter screws of various lengths which are blue in color.
What is 8 millimetre wrench equal to in standard?
An 8 millimetre wrench is a standard size.ANS 2 -8mm is almost exactly equal to 5/16 inch. My wrenches in those sizes are interchangeable.
What is binary 11111111 equal to as a decimal?
11111111 = 255 in standard binary. think of it like so: 128 | 64 | 32 | 16 | 8 | 4 | 2 | 1 1 1 1 1 1 1 1 1 in other words, (1x128) + (1x64) etc. etc. In Signed Binary however, this would equal -127 since in signed binary, the first bit represents the sign for plus or minus. e.g 0 = +, 1 = -. as such: Plus or minus | 64 | 32 | 16 | 8 | 4 | 2 | 1 1 (-) 1 1 1 1 1 1 1
What is bigger an 8 penny nail or 16 penny nail?
A 16d (16 penny) nail is larger. The larger the "penny" the larger the nail. But the lengths can vary, but generally an 8d is 2.5" and an 16d is 3 - 3.5".
What is a 16 penny nail made of?
coper
Why do 16 penny nails have ribs in them?
Many different size nails have 'ribs' on them.They are to make it harder for the nail to be pulled out.A 'spiral' ( ardox ) nail is even harder to pull out.
Is 16d ''penny'' nails used to frame a house?
Normally. 16d box nail. Box means it has a head. Could be 16 Common which has a thicker shaft than a box nail.
Is a 16 penny nail the same as a 16 d nail?
Yes. d is the symbol for a British pence, which is like an American penny. I'll answer the question you didn't ask: why do they use pennies as the unit of measure of nails? Many years ago nails were sold loose, and they were counted out rather than being weighed. The number of pence, or cents, 100 nails in that size would cost you many, many years ago determined the "penny" size. If 100 3-1/2" nails cost 16 pence, they were considered "16 penny" nails. (This also meant there weren't standard nail sizes--if Tom's Hardware charges 16d for 100 3" nails, and Dick's wants 16d for four inch nails. you'd have to go to Tom's for all your nail needs.)
Why is it called a sixteen penny nail?
The penny was as old English term used to describe the number of pennies required to purchase 100 nails. Today the term is used only as a measurement of the length of the nail. A common 16 penny nail used in general construction today has a standard length of 3.5 inches, a number 8 gauge diameter shaft (0.162 inches), a head diameter of 11/32nd of an inch and 44 such nails will weigh one pound.
What is the difference between a roofing nail and a Penny Nail in construction tools?
Roofing nails have large, flat heads to hold down shingles, andtypically have a rough, galvanized coating. Standard box nails have smaller heads that are also flat, and the sizes are specifiedby penny - 4-penny nails are small, like what might be used to put a birdhouse together, 16-penny nails are the big ones commonly used for framing walls, etc.
How is a Framing Hammer used?
A framing hammer is used in building the frame of a house. It has a longer handle and a heavier head for driving the 16 penny nails used to nail the structure together.
When was Will Penny created?
Will Penny was created on 1968-02-16.
What is Jimmy Nail's birthday?
Jimmy Nail was born on March 16, 1954.
When was Nail Minibayev born?
Nail Minibayev was born on 1985-03-16.
What is equal ta 16?
16 = 4 squared = 2 times 8 = or just... 16! Funny?
