To answer this question the voltage of the motor must be stated.
Small house fans run on single-phase induction motors.
They are the same and they use a singe-phase induction motor of 15-30 watts
to calculate the cable size of a run of 30 meters long you first will have to know the current of the appliance use the voltage drop formula V d = (mVxIxL)/1000 once the voltage drop is less than 2.5% of the nominal voltage, the cable should be upsize.
i would use 2 ought if its for your home. go larger for commercial apps.
You need to say whether it's a 150 amp service or a 1200 amp service it has to be one or the other. <<>> A 1/0 copper conductor with an insulation factor of 90 degrees C is rated at 155 amps. There is no ground wire stated for a 150 amp service so the next size up is a 200 amp service. The ground wire for this size is #6 bare AWG. Without knowing what types of loads that are coming off of the distribution a reduced neutral can not be recommended. The neutral will be the same size as the service conductor which is 1/0.
3 core 35 sq mm alu. Or 3 core 25 sq mm cup.
How to calculate a cable size of 3kw motor
we can either use dc series motor or induction machine ,but dc supply is not easily available so we use induction motor ,
Low-power (a few watts) might use a synchronous motor, most fans use an induction motor. Above a couple of horse-power it might be a 3-phase induction motor.
because at the starting the induction motor drawn a heavy current thats why we use starter to increase the starting resistance of the induction motor!
Depending upon the use, it can be a 3 phaze or 1 phaze induction motor. For domestic use it has to be a 1 phaze Induction motor but for industrial use it can be a 3 ph or 1 ph I.M.
1. Induction motor has high starting torque, therefore use for operate pump which need high starting torque. 2. Induction motor operate on variable speed. 3. It can be used as generator when speed of motor is higher than synchronous speed.
cable size for the 90kW motor is 3CX150sqmm aluminum cable
Small house fans run on single-phase induction motors.
because of starting current of induction motor is very high and it damages the insulation of motor
You would use a single-phase induction motor if the available electric power supply is a single-phase one. That applies to the average house or small business.
There no brushes in an induction motor. The rotor is independent and is a short-circuited cage of parallel bars.