Want this question answered?
You need different tools these measurements. For mass you want a scale or balance. You can only use the same tool for length and volume (a ruler, caliper or similar) if the object you are measuring is a well defined solid with known geometric shape. Otherwise you will have to perform a measuring experiment for example put the object you want to determine the volume of in a graduated cylinder, pour a known volume of liquid into the cylinder, read the volume and subtract to determine the object's volume.
There is a tool called a bolt remover that can be used to get the bole out. A hole is drilled in the middle of the bolt then the tool is inserted and turned to back the bolt out.
A ruler or other measuring instrument may be used to determine the dimensions of a regularly shaped abject, and the volume may then be calculated by applying the dimensions to the applicable formula.
i dont know the instrument but i know experiment ..... take volumetric flask full with water insert subject below water level the displacement of level in volume is the volume of that subject.... By Archimedes principle
With an special tool inserted in place of the bolt and a 3 jaw puller.With an special tool inserted in place of the bolt and a 3 jaw puller.
man+metal=tool
man+metal=tool
If nothing on the other side of bolt you can try to drill it out. Use a bit smaller than the bolt, and then use an "easy-out" tool available at most auto parts stores (get the tool before drilling so you can determine the correct size hole to drill. You may need to get a Cobalt drill bit to drill into some hard steel bolts).
The tool is named diamond probe.
Taps and dies are are tools for cutting threads in metal. A tap is a bolt like tool for making for making female threads ,a die is a nut liked tool for making male threads. They are used for cutting internal and external threads
ITS (((last))) a metal tool
A wrench is a tool used to turn a bolt or nut.