It all depends on the dimensions of the steel beam
Compressive load on the top of the I beam and tensile load below the I beam. By increasing the depth of the I beam the it can bear more load capacity
Uniformly Distributed Load fully
plinth beam is a part of a structure can transfer loads to the adjacent columns
Depends on the loads and the properties of the beam. Consult a structural engineer.
beam transfer loads from the joist to the wall or column where it supports..
The stem or the spine is the central structural beam of a ship.
It is a monolythic concrete beam consisting of a web and a flange to form the shape of a"T" .
plinth beam is a part of a structure can transfer loads to the adjacent columns
Depends on the loads and the properties of the beam. Consult a structural engineer.
Truss can carry only vertical loads or axial loads. It depends upon structure. But Beams can carry vertical loads and moments
beam transfer loads from the joist to the wall or column where it supports..
loads are carried out as point load uniformly distributed load and uniformly varying load
plinth beam is a part of a structure can transfer loads to the adjacent columns,grade beam is a type of foundation system used to distribute the weight of a building over unstable soil. The grade beam may sit directly on the loose soil.
the efffective length of a beam is the length along the beam at which the beam will fail when a load is acting upon it. This effective length is usually near the centre of the beam as that is where the stresses are the greatest. For example a fat chick jumping up and down on the beam would reduce the effective length dramatically as the loads are semi-constant but ginormous.
A bressummer beam carries loads from above but has no window or door below it. Therefore its allowable deflection (long term or short loads) can be greater. A lintel on the other hand has a window or door below it and requires less deflection to ensure that the operation of the window/door is not compromised.
Stone, metal or wood depending on need. A lintel is the part, not what it is made of.
A suspension bridge deck is suspended from above on a catenary cable between two fixed points. The Golden Gate Bridge is a suspension bridge. Using suspension techniques, great spans with minimum obstruction under can be created. A beam or truss (reinforced beam) bridge deck is supported from underneath on a construction of beams or arches (bent beams). longer, stronger spans favour the beam truss method of construction, especially where wind generated sway is an issue. The Sydney Harbour Bridge is a Beam/Truss bridge.
The stem or the spine is the central structural beam of a ship.
It is a monolythic concrete beam consisting of a web and a flange to form the shape of a"T" .