The wire that goes to the iat sensor is the red and black wire. the iat sensor is located on the air intake. The air intake is on the drivers side. There are five wires that are on the drivers side.
The speed sensor, on your Nissan, has a black cable. The speed sensor does not actually have any wires. The cable goes to the speedometer.
there is 2 in front and rear located on the hub and runs up on the trucks spindle
the iat sensor is on the air intake on the drivers side of the engine. it has 5 wires on it. the red/black and black are the two iat wires. My 2005 Titan has two black wires, 1 tan wire, 1white wire, 1Red w/white stripe wire. Now what?
can you forward me a picture of the speed sensor to a 2006 nissan altima?
It is located on the tube of the intake. As soon as you open the hood of the truck you'll see the tube leading to a box on the right right side of the engine bay. The sensor is the wire harness coming out of the tube after the ribbed part of the tube. Hope this helps. The air intake temperature sensor is built into the MAF itself on the Titan
the wire connected to the front of the distributo is the crankshaft wire connector follow that wire and it will lead to the crank sensor i believe on the back under the engine
The speed sensor wire is connected to the speed sensor and goes to the speed sensor relay switch. The speed sensor relay switch is connected to the computer by a separate wire.
left front wheel
it's in the distributor, there is a six wire clip that goes on the side of the distributor that makes the camshaft sensor work. I'm trying to see if I can buy it separately or if I have to but thee whole distributor?
locate the air box where the air filter is, and follow the tube that goes into the intake manifold on the engine, and you should run into it befor you hit the intake maifold and it has a wire hooked into it from wire harnest
Locate the front wire on the distributer and follow. it will lead to the crankshaft position sensor.
On the top rear of the transmission is a wire connector with 2 wires. That's the speed sensor. On the top rear of the transmission is a wire connector with 2 wires. That's the speed sensor.