Positive is normally red and negative is normally black or green. Test them with a volt meter to be sure.
negative
There is no ground wire in automobiles, they have tires that insulate the vehicle from the ground. There are only positive and negative wires.
positive
Negative (A+) AG : )
Run a wire from the POSITIVE terminal on the battery and touch the red wire (positive) to the window motor and run another wire from the NEGATIVE terminal on the battery and touch the green wire (negative) to the window motor. The window should go down. Reverse the wires to make the window go up.
Run a wire from the POSITIVE terminal on the battery and touch the red wire (positive) to the window motor and run another wire from the NEGATIVE terminal on the battery and touch the green wire (negative) to the window motor. The window should go down. Reverse the wires to make the window go up.
Replace the entire windwo rubber or put soom Gook in the leak. You have to find the leak.
3.70 on a 2.4 liter, 4 cyl engine, according to spec sheet on window.
To jump the wires on the master power window switch of a 2006 Nissan Frontier, first ensure the vehicle is off and disconnect the battery for safety. Locate the wiring harness for the master switch and identify the power and ground wires. Using a jumper wire, connect the power wire to the corresponding window motor wire to test the window operation. Be cautious to avoid shorting any wires and reconnect everything properly after testing.
FPPW=Number of the false alarms/ The number of testing negative examples
A demonstration of resetting the Nissan Altima Window is available in the links.
There has to be a line in the control window to let you know its working. After the wait time there should be a + or - in the test window. + being positive and - being negative. Hope this helps!