For all those asking for the successful examinees of PMA entrance exam 2011, you can just go to the official website of PMA and you will see the list once you click on the line after the ANNOUNCEMENT... Thank you.
John Ray Delawis
1+1
who pass the entrance examination in pmma in san narciso this year 2010
Answer all questions.... ganyan din ung tanung ko eh
The Philippine Merchant Marine Academy (PMMA) entrance exam is annually conducted simultaneously nationwide at designated testing centers every LAST SATURDAY of SEPTEMBER.Visit www.pmma.edu.ph for the down-loadable application form where the designated testing centers are also listed.
Thermoplastic PMMA is created by heating up the plastic until it becomes pliable. It is a synthetic polymer which is acrylic and most commonly referred to as Plexiglass. It is used in the making of lenses, helmet visors, and airplane windows.
; Polypropylene (PP) : Food containers, appliances, car fenders (bumpers). ; Polystyrene (PS) : Packaging foam, food containers, disposable cups, plates, cutlery, CD and cassette boxes. ; High impact polystyrene (HIPS) : Fridge liners, food packaging, vending cups. ; Acrylonitrile butadiene styrene (ABS) : Electronic equipment cases (e.g., computer monitors, printers, keyboards), drainage pipe. ; Polyethylene terephthalate (PET) : Carbonated drinks bottles, jars, plastic film, microwavable packaging. ; Polyester (PES) : Fibers, textiles. ; Polyamides (PA) (Nylons) : Fibers, toothbrush bristles, fishing line, under-the-hood car engine mouldings. ; Poly(vinyl chloride) (PVC) : Plumbing pipes and guttering, shower curtains, window frames, flooring. ; Polyurethanes (PU) : Cushioning foams, thermal insulation foams, surface coatings, printing rollers. (Currently 6th or 7th most commonly used plastic material, for instance the most commonly used plastic found in cars). ; Polycarbonate (PC) : Compact discs, eyeglasses, riot shields, security windows, traffic lights, lenses. ; Polyvinylidene chloride (PVDC) (Saran) : Food packaging. ; Polyethylene (PE) : Wide range of inexpensive uses including supermarket bags, plastic bottles. ; Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) : A blend of PC and ABS that creates a stronger plastic. Used in car interior and exterior parts, and mobile phone bodies. ; Polymethyl methacrylate (PMMA) : Contact lenses, glazing (best known in this form by its various trade names around the world; e.g., Perspex, Oroglas, Plexiglas), aglets, fluorescent light diffusers, rear light covers for vehicles. ; Polytetrafluoroethylene (PTFE) (trade name Teflon) : Heat-resistant, low-friction coatings, used in things like non-stick surfaces for frying pans, plumber's tape and water slides. ; Polyetheretherketone (PEEK) (Polyetherketone) : Strong, chemical- and heat-resistant thermoplastic, biocompatibility allows for use in medical implant applications, aerospace mouldings. One of the most expensive commercial polymers. ; Polyetherimide (PEI) (Ultem) : A high temperature, chemically stable polymer that does not crystallize. ; Phenolics (PF) or (phenol formaldehydes) : High modulus, relatively heat resistant, and excellent fire resistant polymer. Used for insulating parts in electrical fixtures, paper laminated products (e.g., Formica), thermally insulation foams. It is a thermosetting plastic, with the familiar trade name Bakelite, that can be moulded by heat and pressure when mixed with a filler-like wood flour or can be cast in its unfilled liquid form or cast as foam (e.g., Oasis). Problems include the probability of mouldings naturally being dark colours (red, green, brown), and as thermoset difficult to recycle. ; Urea-formaldehyde (UF) : One of the aminoplasts and used as a multi-colorable alternative to Phenolics. Used as a wood adhesive (for plywood, chipboard, hardboard) and electrical switch housings. ; Melamine formaldehyde (MF) : One of the aminoplasts, and used as a multi-colorable alternative to phenolics, for instance in mouldings (e.g., break-resistance alternatives to ceramic cups, plates and bowls for children) and the decorated top surface layer of the paper laminates (e.g., Formica). ; Polylactic acid (PLA) : A biodegradable, thermoplastic, found converted into a variety of aliphatic polyesters derived from lactic acid which in turn can be made by fermentation of various agricultural products such as corn starch, once made from dairy products. ; Plastarch material : Biodegradable and heat resistant, thermoplastic composed of modified corn starch.
mark roy bartolome esplana
who pass the entrance examination in pmma in san narciso this year 2010
yes
on August 26,2011
leonard mark rosal
alfredo m. Madrid jr.
Answer all questions.... ganyan din ung tanung ko eh
look for the testing center found on your application form...father of evolution
The Philippine Merchant Marine Academy (PMMA) entrance exam is annually conducted simultaneously nationwide at designated testing centers every LAST SATURDAY of SEPTEMBER.Visit www.pmma.edu.ph for the down-loadable application form where the designated testing centers are also listed.
PMMA is a synthetic material.
PMMA LDPE HDPE
yes