Isn't it obvious...
Manually turning off a shunt trip breaker should not set off the fire alarm. The only way that the breaker could set off the fire alarm when turned to the off position is if there is an auxiliary contact on the breaker connected to the fire alarm circuit. This is not usually done because the breaker should be able to be turned off when doing maintenance on the breakers circuit. If the breaker is a mandatory feed breaker to a piece of fire alarm equipment and shouldn't be left in the off position it might have a trouble circuit connected to the fire alarm panel. A trouble alarm on a fire alarm panel is different from an alarm circuit alarm.
No
No. The fire alarm was set off after an incompetent employee microwaved their tea and the had to evacuate the building.
To effectively shut off a fire alarm, locate the alarm panel and enter the code or use a key to silence the alarm. If you cannot do this, contact the fire department for assistance.
we set the fire alarm off accidently in a building and the truck turnedup. How much do they charge to come?
To turn off a fire alarm in your house, locate the alarm and press the reset button or remove the batteries. Make sure to address any potential fire hazards before turning off the alarm.
Depending on how loud your alarm is,it is possible that it may set off another cars alarm.
You can set the alarm off by just simply jumping on the car.
If there is a fire alarm going off you should call the fire department. There may be a gas or carbon monoxide leak. If the fire department is called, the landlord will be forced to do something.
They can be the same thing. Fire Alarm Systems are electronic systems which are designed to warn and alert people in the case of a fire. These systems usually contain a central fire alarm control panel, a manual call point and smoke/heat detectors. The heat detectors and detect heat and set off the fire alarm and the smoke detectors detect the smoke from a fire to also set of the fire alarm system. The manual call points are pressed, smashed by someone in order to set off the fire alarms to warn occupants that there is a fire. Heat detectors and usually used in kitchens, bioler houses etc where a lot of smoke/stome is produced, thus stoppping false alarms. Although, you can get seperate heat detection systems which nearly do the same job as fire alarm systems, just with heat detectors.
When the smokes reaches the device and sets off the alarm
When the fire alarm went off and then stopped, it likely means that there was a brief activation of the alarm system followed by a cessation of the alarm sound. This could have been due to a false alarm, a malfunction in the system, or a situation where the alarm was quickly resolved.