No a 3-way is a single pole double throw. A four way switch swaps travelers.
3 way switches have 3 terminals. A common on and off switch only has 2.
One 3-way dimmer switch, one regular 3-way switch and one 4-way switch. The 4-way is wired between the two pairs of travelers from the other two switches. The common on the dimmer is tied to either the light or to the branch hot and the common on the other 3-way is tied to whichever is left (hot or the light).
The voltage ratio is 2:3. So for every 2 volts in you'll get 3 volts out. Secondary = 1.5 x Primary Voltage.
First you need to decide what you are trying to accomplish. You can wire the Timer switch in series with or parallel to the 3-way switches. If in series then the 3-way switch function would depend on the timer state. If the Timer switch was ON then the 3-way switch could turn the connected device ON or OFF from either location. If the Timer switch were OFF the device would be OFF no matter what you did with 3-way switches. To wire in this fashion put the timer between the supply and the input to the switches. If the Timer is in parallel then if the Timer is ON it doesn't matter what you do with the 3-way switch, the device will be ON as long as the Timer is ON. If the Timer is OFF then the 3-way switches will work in their normal fashion. To wire in parallel connect the supply to one side of the Timer and the device to the other.
A Chicago 3-way typically refers to a hot dog topped with mustard, onions, and sport peppers. This combination is a popular way to enjoy a classic Chicago-style hot dog.
A 3 way switch wired ---- , but works A 3 way switch wired not to code ---- , but works A 3 way switch wired not to code but it works
No a 3-way is a single pole double throw. A four way switch swaps travelers.
YES
3 way switches have 3 terminals. A common on and off switch only has 2.
I believe what you need for a 3 bed house is 60 amps.
If you have the symbol for a regular switch, a 3-way switch is the same symbol with a '3' next to it like a subscript.
Use AWG # 3 copper.
You answered it already - 3 volts - I think you need to reconsider and restate your question.
One 3-way dimmer switch, one regular 3-way switch and one 4-way switch. The 4-way is wired between the two pairs of travelers from the other two switches. The common on the dimmer is tied to either the light or to the branch hot and the common on the other 3-way is tied to whichever is left (hot or the light).
Divide the top number(numerator) by the bottom number(denominator). 3/5 3 divided by 5 =.60 60%
One or both of the switches is miswired and the two lamps are in series. When everything else fails. Read the instructions.