CO2 is an oxygen compound or a non-inert gas,the purpose of a shielding gas is to shield the weld and the electrode from oxygen. argon, nitrogen and helium are the most common gases used for GTAW
The variable parameters for gas tungsten arc welding (GTAW) include; current, arc length, electrode type, electrode size, electrode grind angle, shielding gas type, shielding gas flow rate, and travel speed.
CO2 and O2 can not be used in the same time for shielding gas in MIG welding, it would create too much oxidation of the molten metal.
Check the shielding gas & its flow rate.
shielded metal arc welding does not required any shielding gas
mig welding is Metal Inert Gas welding. it typically uses Constant voltage DC+ current. It uses a wire feeder that supplies the electrode to the weld puddle and shields the molten weld puddle with inert gas (argon/co2 blend). Filler wire and shielding gas depend on the metal being welded.
The variable parameters for gas tungsten arc welding (GTAW) include; current, arc length, electrode type, electrode size, electrode grind angle, shielding gas type, shielding gas flow rate, and travel speed.
For TIG - GTAW "heliarc" welding Argon replaced Helium because it is #1 cheaper #2 heavier so coverage is better (stays around the weld area).
CO2 and O2 can not be used in the same time for shielding gas in MIG welding, it would create too much oxidation of the molten metal.
GAS TUNGSTEN ARC WELDING
Check the shielding gas & its flow rate.
Calcium carbonate is decomposed and the products CO/CO2 form a gas shielding for the weld.
GTAW is commonly used to weld thin slections of stainless steel and non-ferrous metals luike aluminum, magnesium and copper alloys. The gas shield is never removed to prevent oxidation of its surface and contamination of the weld.
Argon is the most common gas used in gas metal arc welding.
Carbon Dioxide iswidely used for MIG welding but I never heard of carbon monoxide and it is definitely not used in the industry as shielding gas. The purpose of the shielding gas is not just shielding the weld pool but offer arc stability with an adequate ionization potential. The heat and electrical conducctivity of the gas at the arc temperature are a huge factor as well.
Carbon dioxide or CO2.
shielded metal arc welding does not required any shielding gas
A gas syringe A gas syringe