You either have a corroded or loose battery cable connection at the battery, a defective or drained battery, defective starter relay or starter.
Check your battery.
stater or silanoid
h/lamp & tns relay clicking when car is off & car will not start
A loud fast clicking noise is usually indicative of a low battery or a loose cable.
If the Chrysler is only making a clicking noise and will not start, check the starter. Also check the alternator, and the battery. The starter solenoid is more than likely the reason the car is clicking and not starting.
If you have checked all possible solutions for example the battery being dead, the starter going out, any possible loose connections ex: battery cable wires, The Solenoid and your still having the same issues then your ignition switch would be my next guess.
Get bin Laiden
cars tend too
I have the same car with the same clicking noise right after you start the engine. The noise stops shortly after starting. There was a recall from Chrysler for this problem. Contact your local dealer regarding this matter.
It really depends on the cause of the noise. Every Inline-4 Cylinder car I have ever seen makes some kind of clicking type noise when they are started cold, I'm pretty sure it's noise from the mechanical valve lifters. If it's really concerning to you, take the car to a qualified mechanic.
With this symptom, if you tried to jump start the car it would start. The answer was a corroded Black/Cable going to the Negative terminal of the Battery.
Car won't start. Won't run. Starter will whine cause it's not cranking anything. makes a noise at the bottom of car sound like motor is about to go clicking and knocking sound