0
ceramic can withstand high temperature
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Wall plate thickness of LPG cylinder?
minimum wall thickness of cylinder of water capacity 33.3 liter is 2.5 mm
How do you remove moss from cement wall?
Wash, using a stiff brush.
What is water wall in boiler?
A waterwall in a boiler is any furnace wall that is comprised of refractory and tubes in a water-tube boiler. The tubes are evenly spaced and generally connect to headers which in turn are connected back to the main generating bank of the boiler. They serve a two fold purpose here in that they capture heat that would otherwise escape to the atmosphere and help heat the water in the boiler. And they also help keep the refractory cool (relatively speaking) This prevents spalling of the refractory.
What is a gas furnace heat exchanger?
The heat exchanger is the metal wall or tubing that is heated up when the burners are ignited. The inside of the heat exchanger allows the toxic flue gases produced from the burners to exhaust out through the furnace flue. The outside of the heat exchanger is where the cold air passes over, becomes warmed, and is blown throughout the ductwork of the home. The heat exchanger is the only wall separating the toxic flue gases from the supply air. If a crack develops in the heat exchanger, there is a potential for carbon monoxide gas to leak over to the supply side and be blown throughout your rooms. Carbon monoxide gas is odorless. The human senses will not detect its presence. Ron Ferrara- DHR Mechanical Services, Inc.
What is Uses of Flanges in Petrochemical Industries?
A flange is a mechanism by which tubing, valves, pumps, and other machinery are linked to create a piping structure. It also makes washing, review or alteration easy to access. Typically, the flanges are welded or screwed. Flanged joints are designed to provide a bond by bolting two flanges together with a gasket between them. Pipe flanges are constructed of all kinds of materials, such as stainless steel, cast iron, copper, silver, bronze, rubber, etc., but the most commonly used type is carbon steel manufactured and machined surfaces. During the choosing of the pipe, the design of a flange is set, in most situations, a flange is of the same type as the plug.The boom in private petrochemical entrants has put extreme pressure on the demand for pipe fitters. Ongoing production line projects growth requires a high degree of automotive pneumatic fittings and fluid parts. The use of fittings and flanges manufactured from a particular metal has become a common procedure in the industry. These fittings can be used in research laboratories, pilot plants and factories in addition to pipelines. As the compounds under analysis are highly corrosive, providing the right products for the laboratory poses a major challenge.It is indeed fair to say that the vast network of pipelines used to carry different chemicals and liquids is the most important component of transportation in the developed world. There is another name for such pipelines that is “flow piping” that applies to the whole pipeline network that holds fluids such as air, steam, water, additives, gasoline, etc. within and around an industrial infrastructure that functions in the production of goods and services or power generation. The extreme temperatures of temperature and pressure will trigger the connection to leak. Hence the main requirement is to protect the joint adequately with fittings and flanges for corrosion and heat-resistant tubing.The flange forms most used in the Petro and chemical industries are:1. Weld-neck Flanges:Such flanges are common, and are used with a tapered center in high-pressure environments. In normal bending conditions the Weld Neck flanges are particularly useful.2. Slip-on flanges:A flange slipping over the pipe, welded in and out to improve the pressure and avoid leakage. A preference among engineers as opposed to the weld-neck because of its lower cost.3. Lap-joint Flanges:Apart from the slip-on, these flanges are slid over the valve but not fastened, which is used in combination with the bottom of a lap joint stub. Instead, the flange is held in place by the pressure exerted by the flange friction over the back of the pipe’s chest towards the gasket.4. Threaded Flanges:If used in special circumstances, the threaded flange can be attached to the tubing without being welded. These are usually placed on deep-wall thickness tubes, used to create the inner string.5. Blind Flanges:Most flanges are made without a screw, and are used in pressure vessels to blank off pipe ends, doors, and openings. These are also best suited for high pressure activities.Applications of Flanges in the petrochemical industries:Pipe fittings used in the gas, oil, and petrochemical industries should be traceable, accurate, and made of high-quality steel or alloy. OEMs (Original Equipment Manufacturers) are constantly upgrading the equipment to raise their production across the vertical sector. The chemical plant needs special pipe fittings which can tolerate impacts of batch and continuous manufacturing, fluid movement, heat and mass transfer, etc. Since most processes are ongoing, changes need to be made as swiftly as possible. This not only minimizes the harm but also increases the risk of injuries.Duplex and carbon steel are some of the most favored alloys used in pipe fittings and petrochemical flanges production. In addition to the consistency of the products, ingenuity plays a key role in ensuring productivity in pipe fitting. Fittings that are easy to install and reversible also make the right choice.
What are some difficulties in the development of a fusion reactor?
Achieving the required temperature for nuclear fusion to occurconfining the plasma away from the wall surfaces
What are the disadvantages of ceramic wall tile?
burit
What is called a ceramic vessel with a spigot that is made to hang on a wall?
A wall fountain!
Can you stick ceramic wall tiles on to ceamic wall tiles?
No, the adhesive won't hold.
Are an example of a ceramics?
the examples of ceramic materials are: 1. ceramic art 2. ceramic 3. ceramic classfication 4. ceramic wall 5. ceramic material 6. ceramic man made
What do ceramic tile contractors do?
Ceramic tile contractors install ceramic tile floors in any room of a house, and they are specialized and do a great job. They also install other types of tiles, such as ceramic wall tiles, and ceramic countertop tiles.
What does the abbreviation CTW mean in a kitchen floor plan?
Ceramic Tile Wall.
What is the nuclear wall?
A line or defence network of nuclear missiles. ^^fail the nuclear wall is in a cell and it is the double membrane surrounding the nucleus that guy needs to retake seventh grade
Is the cell membrane and nuclear membrane the same?
yes, in terms of substances used; however, depending on where in the body the cells is positioned both the nuclear and cell membrane may differ.
What is the wall that surroundd the nucleus?
The nuclear envelope
How do you remove bathroom ceramic wall tile without damaging the wallboard and finish and paint on the other side of the common wall?
With great difficulty!
What is the ingredient of tile adhesive?
There are many kinds of tile adhesive and you don't specify which . However most are basically of two kinds - Very fine Portland cement with additives, used mainly for stone or ceramic floor tiles and a type of modified latex for ceramic wall tiles.
