To 'damp' vibrations in the conductors.
Liquid filled dampers Air filled dampers Mechanical dampers Rubber pad dampers Spiral dampers
Seismic dampers are devices used in building construction to protect the buildings against earthquake and other seismic events.
That is depends on the factor of sag and clearance required. And also on the level of voltage transmission used.
it will be implemented soon...planning is in progress
Transmission lines are three-phase systems. There are three line conductors in a three-phase system. However, to reduce electric stress at higher voltages, these lines are frequently made up of 'bundled' conductors -so each line might have two, three, or four separate conductors. In addition, transmission towers usually carry separate circuits -i.e. separate three-phase circuits on opposite sides of each tower. So, in the UK for example, a typical 400-kV transmission line will consist of two, separate, three-phase circuits suspended on each side of each tower, with each line consisting of four bundled conductors. That's 24 conductors.
Liquid filled dampers Air filled dampers Mechanical dampers Rubber pad dampers Spiral dampers
The major material used in the construction of transmission lines is aluminum alloy. Steel is also used to reinforce the lines. No insulation is used for overhead transmission lines.
Transmission towers are usually made of steel to help support over the head power lines. They are used in high voltage AC and DC systems and can come in different shapes and sizes.
Transmission towers are usually paired or grouped and used to convey high-tension power lines over distances. Do not confuse with antennas used for radio or TV transmissions. a telecommunications tower is used for broadcast purposes -radio or tv or both. neither type of tower is necessarily manned- power- transmission towers are normally unattended and high up. There you have it. good to see an interest in civil engineering structures- things are looking up!
mho rerlay is used in long transmission lines
connection of the ground of all the transmission lines and used as a communication cable between protection devices
Seismic dampers are devices used in building construction to protect the buildings against earthquake and other seismic events.
That is depends on the factor of sag and clearance required. And also on the level of voltage transmission used.
They used to be on Mt. Baldy - above Pasadena.
Stranded aluminium, with a steel core.
Transmission lines are thicker than TV cable wires because the transmission lines are used to transmit both low freq and high freq signals. And the losses of the transmission lines depend the resistance of the line which inturn depend upon length and area. As we have to transmitt the signals over long distances the transmission lines are thicker in size.Whereas in TV cable wires the construction is totally different in which transmission of signals is in between two conductors thereby avoiding losses.Therefore there is no necessity for these lines to be made thicker. That is why transmission lines are thicker than TV cable wires.
Copper is a good conductor and is fairly strong. It generally is not used in power transmission lines due to cost - generally aluminimum is used.