0
Burned tranny fluid, check level and color, if color is dark brown chances are the tranny has been neglected on fluid changes. I would go to Goodyear or your oil change store and have them replace fluid. They will tell you that it's not recommended if it's burned, if this is the case you will have to rebuild it costing 2,000.00 + or - a few $
What else can I help you with?
How do you repair a broken gear shift on a 1993 Mazda protege?
To repair a broken gear shift on a 1993 Mazda Protege, first, ensure the vehicle is safely parked and the ignition is off. Inspect the shift linkage and cables for any visible damage or disconnections, and replace any broken components. If the issue lies within the gear selector assembly, you may need to disassemble the center console to access and repair or replace the assembly. Reassemble everything securely, and test the gear shift for proper function before driving.
Mazda mx3 1993 wont shift out of park?
The neutral safety switch, release switch, or brake switch is bad.
Would the engine of a 93 ranger bolt behind a transmission manual shift of a 90 madza B2200 both having 4-cylinder engines?
NO!! The Mazda engine and ford engine are totally different period.Mazda was still strickly Mazda until 1993. It was not until 1994 when Mazda and ford became the same on engine and tranmission similarities.You need a Mazda engine for your Mazda transmission.Note the 1986-1993 Mazda bseries trucks are all Mazda manufactured.Ford is not interchangeable with these models period.
Your 1993 Pontiac Grand Am will not shift into park?
If your 1993 Pontiac Grand Am will not shift into part, the transmission is probably seized up. The first step is ensuring the transmission fluid is not too low.
Your 1993 Mazda Miata 5 Speed is stuck in gear The clutch will bring it to neutral but the shift linkage seems to be out of alignment How do you realign the linkage?
To realign the shift linkage on your 1993 Mazda Miata, first, ensure the vehicle is securely lifted and supported. Locate the shift linkage under the car; you may need to remove some components for better access. You'll find a threaded adjustment on the linkage; loosen the lock nut and adjust the linkage to find the correct alignment, ensuring it smoothly engages all gears. Finally, tighten the lock nut and test the shifting to confirm the adjustment is effective.
1993 Toyota pickup first and second gear shift fine but 3rd and 4th gears grind and do not fully engage all the time?
maybe the links are stiff maybe you need to oil them
How do you remove the console shift knob on an AT 1993 Olds Achieva?
To remove the console shift knob on the AT 1993 Olds Achieva, first pry the cover from the top of the shift knob. Then, access the single screw inside the cover of the shift knob and turn it counter-clockwise to release the knob.
How many freeze plugs are in the 1993 Mazda mx-3 engine and where are they located?
First off, it would be helpfull to know weather or not it is a 1.6 or 1.8 DOHC engine...second, why would you need to know where they are at, (on side of block)?????
Is the 1993 Mazda rx7 a lemon?
No.
Where is the fuel filter located on a 1993 Mazda MX-3?
There are two. one is in the fuel tank with the fuel pump, the second is at the fuel pressure regulator
How do you locate starter solenoid on Mazda 626 1993 on Mazda 1993 626 fwd?
Follow + battery cable should connect to solenoid
Does a 1993 Mazda Protege DX have an airbag?
No, the 1993 Mazda Protege DX does not have an airbag. The vehicle does have a passive restraints system and is extremely reliable.
