answersLogoWhite

0

the loss of water due to extra heat and air temp

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Chemistry

What is the difference between false set and flash set of cement?

False set occurs when cement appears to set but can still be remixed and flow, while flash set is a rapid and irreversible setting of cement that cannot be reversed. False set can be corrected by adding more water and re-mixing, while flash set requires the cement to be discarded and fresh cement to be used.


Difference between gas concrete and foam concrete?

Gas concrete is also known as aerated concrete. It is generally made by introducing air or gas in to slurry composed of portland cement or lime and finely crushed silicious filters.Foam Concrete. A stabe foam is mixed with cement and crushed sand slurry thus causing the cellular structures when it gets set and hardened.


Does a 60 pound bag of cement weigh 60 pounds when dried concrete?

No, a 60 pound bag of cement does not weigh the same when it is turned into dried concrete. Once mixed with water and set, the weight of the dried concrete will be slightly more than the original weight of the bag of cement due to the water and other additives in the mixture.


Does sugar make concrete stonger?

No, It will weeken. As much as 1.5% weight per volume of a suspended sugar will have an effect of extending the plasticity cycle of the setting concrete and allow it to break esier once set. Exposure to syrup solutions will degrade, etch and weeken already cured placements.


Does muratic acid soften concrete?

Yes, muriatic acid can soften concrete by dissolving the calcium compounds in the concrete, making it easier to remove. However, it is a strong and potentially hazardous chemical that should be handled with caution and used only with proper safety equipment and ventilation. Additionally, it can damage the surrounding surfaces and should be used carefully.