A washer uses electricity to power the motor that turns the agitator (or drum) and pumps out the water.
Total Flow Area (TFA) is summation of nozzle areas which fluid can pass through. When you consider about the TFA, you need to count all nozzles that you have in a bit or a reamer. " http://www.drillingformulas.com/total-flow-area-tfa/ "
Yes and no. It would only be able to replace some electricity. it would replace solar electricity and thermal but not water.
Electricity by itself is fairly clean; but whatever process is used to generate the electricity may cause pollution. You simply don't get electricity out of nothing, you need to convert some other type of energy to electricity.
Bar magnets are already magnetized. They don't need to add wire and electricity.
use geothermal energy when you need electricity or radiant light.
Electricity does flow back to the power plant. This electricity is what forms the circuit needed to actually deliver the electricity to you when you need it.
Flowing electrons makes electricity (they flow from negative to positive. ). You need a circuit or a path for the electrons to move through, a power source like a battery or a generator, and something to use the electricity, like a light bulb...
Electricity is the flow of electrons.Hence it requires a path containing free electrons in order to flow.
Electric current flows through wires, but to transmit electric power you need two wires with a voltage between them, connected to a power source.
An insulator is a material that slows the flow of heat and electricity. Electrical wires need insulators periodically along it's length over whatever distance.
The inlet pressure can be as low as 45 PSI as long as there is a flow of about 3 gpm. The pump will easily pump it to 1500 psi through the appropriate nozzle
A circuit must have three basic components to make electricity flow. 1. Source of power or electricity. 2. Wires, switches and conductors through which the current can flow. 3. And finally a load to complete the circuit.
The definition of electricity is the flow of charge. Usually our charges will be carried by free-flowing electrons. Negatively-charged electrons are loosely held to atoms of conductive materials. With a little push we can free electrons from atoms and get them to flow in a generally uniform direction. A closed circuit of conductive material provides a path for electrons to continuously flow. The charges are propelled by an electric field. We need a source of electric potential (voltage), which pushes electrons from a point of low potential energy to higher potential energy.
A conductor, in electrical terms, is any material that electricity can flow through. A semiconductor allows you to control the path of electricity. The original version of this was the Vacuum Tube, followed by the Transistor. The transistors got smaller and smaller, now made of silicone, and are now located in computer chips.
Usually there is a gap around the washer hose that lets enough air in that it does not need a vent.
In order to have the electricity or the flow or electrons going around the circuit, the circuit must be closed. If it is not closed then electrons cannot flow.
Superconductors are materials that have very low or no resistance to the flow of electricity. These materials usually need to be very cold for this property to appear.