0
Why does gfci breaker trip when something is turned on a separate circuit?
Wiki User
∙ 8y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What could be the problem if a breaker trips when the light is turned off?
A short circuit in the wiring or in the switch.
Could a bad circuit breaker light switch or plug outlet cause the bedroom light to flicker when turned on?
Yes a bad circuit breaker and a bad light switch can cause a light to flicker when its turned on. It could also be caused by loose wiring going or coming from that paticular circuit. it also could be something in the fixture itself causing. Checking for loose connections is your cheapest and first route to go.
What would cause circuit breaker to trip in new box from old box?
A circuit breaker will trip if it is faulty or if the connected circuit has a short circuit or a connected device is trying to draw more current than the breaker rating. If you disconnect the output wire from the breaker and it still trips, it is a faulty breaker. If the breaker is tripping immediately when it is turned on then start disconnecting elements of the circuit to see what might be causing the problem. If everything was working and now isn't, it is likely that the wire from the breaker is nicked where it exits the box and is shorting to the feedthru connector.
How do you de-energize a circuit?
To de-energize a circuit, the voltage has to be cut off at the source. This is usually done with a disconnect switch which is located just before the circuit's load. Turning off the breaker on a distribution panel will de-energize the circuit it is feeding. To make sure that the voltage can not be turned back on when work is being done on the circuit, the switch or breaker must have a lock off device to prevent the circuit from being turned on, except by the person that locked the circuit off.
What can cause a circuit breaker to suddenly start tripping?
If the breaker trips when nothing is turned on it could be a mouse problem. If it only trips when certain lights or appliances are turned on one of them is probably the reason.If it trips when nothing is being turned on or off something is getting hot. You should then have qualified electrician look at it. Hope this is usefull.
Why do the headlights of a 1991 ford explorer go off and on when turned on?
The headlight circuit is protected by a self-resetting circuit breaker. Something in the circuit is drawing too much power and the breaker is cycling on and off.
What could be the problem if a breaker trips when the light is turned off?
A short circuit in the wiring or in the switch.
Could a bad circuit breaker light switch or plug outlet cause the bedroom light to flicker when turned on?
Yes a bad circuit breaker and a bad light switch can cause a light to flicker when its turned on. It could also be caused by loose wiring going or coming from that paticular circuit. it also could be something in the fixture itself causing. Checking for loose connections is your cheapest and first route to go.
What would cause circuit breaker to trip in new box from old box?
A circuit breaker will trip if it is faulty or if the connected circuit has a short circuit or a connected device is trying to draw more current than the breaker rating. If you disconnect the output wire from the breaker and it still trips, it is a faulty breaker. If the breaker is tripping immediately when it is turned on then start disconnecting elements of the circuit to see what might be causing the problem. If everything was working and now isn't, it is likely that the wire from the breaker is nicked where it exits the box and is shorting to the feedthru connector.
Do you have a 15 0r 20 amp circuit?
Go to your distribution panel and shut off the breaker that you think is the circuit in question. If the circuit becomes de-energized then the breaker you just turned off feeds that circuit. Look on the handle of the breaker and the number you see is the amperage of that circuit. <<>> Determination of a 15 or 20 Ampere circuit is normally indicated by a combination of a 20A breaker and a 20A dedicated outlet. A 15A circuit normally has multiple outlets; not typical in a 20A circuit.
How do you de-energize a circuit?
To de-energize a circuit, the voltage has to be cut off at the source. This is usually done with a disconnect switch which is located just before the circuit's load. Turning off the breaker on a distribution panel will de-energize the circuit it is feeding. To make sure that the voltage can not be turned back on when work is being done on the circuit, the switch or breaker must have a lock off device to prevent the circuit from being turned on, except by the person that locked the circuit off.
Will manually turning off a shunt trip breaker set off the fire alarm?
Manually turning off a shunt trip breaker should not set off the fire alarm. The only way that the breaker could set off the fire alarm when turned to the off position is if there is an auxiliary contact on the breaker connected to the fire alarm circuit. This is not usually done because the breaker should be able to be turned off when doing maintenance on the breakers circuit. If the breaker is a mandatory feed breaker to a piece of fire alarm equipment and shouldn't be left in the off position it might have a trouble circuit connected to the fire alarm panel. A trouble alarm on a fire alarm panel is different from an alarm circuit alarm.
What can cause a circuit breaker to suddenly start tripping?
If the breaker trips when nothing is turned on it could be a mouse problem. If it only trips when certain lights or appliances are turned on one of them is probably the reason.If it trips when nothing is being turned on or off something is getting hot. You should then have qualified electrician look at it. Hope this is usefull.
Will turning off the main breaker turn off all the power to the circuit breaker box?
No. Power to all the circuit breakers will be cut off except for the Main power breaker. The Main power breaker (which supplies power to all other breakers and will say 100, or whatever your max breaker box power is, on it )will have power going to it all the time, unless power is turned off outside the house.
What makes a circuit breaker go bad?
A circuit breaker can go bad from being tripped too many times. Many people don't understand that the tripping of a circuit breaker indicates a problem that needs to be corrected. They usually just reset the circuit breaker, leading to a very common second (or third, or fourth) trip. Circuit breakers tripping are for the prevention of fire due to excessive heat in the circuit. They're not supposed to be tripped repeatedly. This can wear the breaker out. Believe it or not, I've also seen circuit breakers fail to re-energize after being turned off. I speculate this was actually caused by the breaker never having been cycled (it was a main breaker), and the time elapsed since it was installed. Electrical equipment doesn't last forever. It's the same as anything else.
What causes circuit breaker to trip even when it's properly rated?
A circuit breaker is dual function. The only time it will trip is if it senses a fault current that is rated higher than the breaker rating (short circuit). The other trip condition is if the circuit is overloaded and is drawing a current higher than the breaker rating. On breakers that protect motor feeders the breaker has to be rated 250% higher than the motors full load amperage. If the breaker has lots of use and is used for a switch being manually turned off and on will weaken the trip value of the breaker. If you have access to, or know an electrician, a clamp on amp meter on the conductor that the breaker feeds will tell you what is happening. Clamp the line and turn on the load to see exactly what the current is. If, like you say, the breaker is properly rated and the current is within the breaker limits then change out the breaker for a new one.
Will your electronics work if you turn off the circuit breaker to the surge strip?
The only way your electronics will work if you turn off the circuit breaker to the surge strip is if they are able to run on battery power. If the surge strip is connected to a UPS (uninterrupted power supply) as many commercial offices are, the electronics will stay operable until the circuit breaker is reset or turned back on if purposely turned off. If the utility service is off, the electronics will stay operable until the power is restored or the UPS power source fails.
