Want this question answered?
Because nitric acid is highly fuming liquid, it spreads in air and is highly corrosive.
Because if not the air will escape through the gap. Meaning, presuming you want the balloon to inflate it will not.
Cyanoacrylate (super glue) doesn't stick until it dries and sets up.ANS 2 - Any glue needs to partially evaporate in air to stick. If kept in an air tight bottle it can't set.
It is moisture and air that causes metal to rust, therefore if something is air tight and doesn't get much air it can't easily rust.
A metal and nonmetal react to form an ionic bond. This bond is the result of the nonmetal "desiring" electrons to fill out its valence, and a metal "desiring" to give up its electrons so that it can fill out its valence. This forms a tight bond, because the opposite charges bind them together.
the metal cap will expand , and it will be easier to remove the cap from the bottle
The heat expands the metal.
how to loosen a tight nut
The heat causes the metal in the cap to expand making it looser around the bottle
Two kids holding empty metal cans to their ears with a tight piece of string between the cans
you better get into her then and loosen it up
To make something less tight, such as ropes.
You need to loosen the holding bolt on the alternator (there are actually two of them, one fixes the holding bolt, and holding bolt itself). Then loosen the bolt attaching the alternator to engine, and move the alternator toward the ground. Remove the old belt, install a new one. Now you need to make sure that the belt is tight enough. If you cannot twist the belt more than 1/4 of full turn, it's tight enough. Do not overtighten because it destroy the belt as well as bearings. Everything else is in reverse order.
Well, my girlfriend was tight, then as our relationship progressed, we got more physical. And eventually you "loosen" somewhat and it stops hurting to have sex.
metal expands due to the rise in heat making it bigger than the actual container (slightly) making it easier to take off
No, You should check to make sure it is tight enough.
metal expands due to the rise in heat making it bigger than the actual container (slightly) making it easier to take off