The input sunshell splines have stripped or the hub has broken off. This will give you 1st + 3rd gears only with no reverse, 2nd, or 4th gear.
the transmission is smoked needs to be taken out and inspecked or there is a LINKAGE PROBLEM GOOD LUCK JOEY
A bad transmission.
i have a 92 s-10 blazer and it has no reverse Andy ideas?. it will go in to drive and shift in to all the gears..but will no go into reverse? can u help me
No. Lefty loosey, righty tighty.
Buy a rebuilt transmission and install it.
Time for a transmission rebuild.
The most forward cylinder on the driver's side.
You have to pull tranny. it is sandwiched between that & block, but pretty straight forward.
Yes, the doors from a 98 Chevy Blazer will fit a 2001 Chevy Blazer with a little moderation.
Remove the positive battery cable from your 1997 Chevy Blazer battery. Remove the cables from the front of your starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
Left side (drivers side) of transmission.
Frozen/seized clutch pack, time for a rebuild.