A b c d e f g h i j k l m n o p q r s t u n v w x y and z! I don't know thats why i asked thicko god who are you justin bebire (i don't know how to spell his name)
it helps so people don't get shocks.
That is because the plastic acts as an insulator.
why are metal prongs of a plug sealed in plastic and rubber
If they were metal and the live had somehow come loose and was touching the casing, it would make the plug case live too. However electricity does not flow through plastic because the electrons can't pass.
Plastic does not conduct electricity.
Plastic Lol
Thermoplastic
Because plastic is a good insulator from heat & electricity.
Not too hard, but you have to be creative or buy a special tool. At the bottom of the oil pan there is a large black circular plastic plug. All you have to do is unscrew this (be careful about the oil that will come out when you get it out). You should drain the oil first, of course, but you will still have oil come out when you pull that plastic plug, just like you do when you pull a normal oil filter. The paper element sits inside that plastic plug. Clean everything off, put the new filter inside the plastic plug, then screw the plastic plug back in. I've used several methods to get the plastic plug out. I can put two screw drivers in the holes in the plug, then use a prybar between the two screwdrivers to unscrew the plug. I have also put two bolts in a peice of wood or metat that are spaced appropriately to fit in the holes in the bottom of the plug
1. unplug side plug (it is usually a half circle on the plastic side thing connecting the wire front and back things) 2. take plastic tunnel and put it where the plastic plug was 3. connect other tunnels using rubber thing that should come with tunnel 4. MAKE SURE THERE ARE NO GAPS OR YOU WILL FIND YOUR HAMSTER OUT OF THE CAGE 5. MAKE SURE THERE IS AN ENDING TO THE TUNNELS. it could round back INTO the cage or it cut off using plug.
There is no drain plug. If you want to do this you will need to suck the oil out. I have heard of people using a turkey baster with a small plastic hose. Make sure you use the oil specified for the supercharger to replace it and the proper amount. Hope this helps. "G"
Depending on where you purchase your plastic plug, it can cost between 50 pence and ‘£2. They can either be purchased online or at most good hardware stores.
To get to the drain plug you have to remove the front two plastic splash shields to get to the drain plug.