I had this problem with my 2001 Venture, the dealer replaced the motor and the mechanism. The van was only 6 mos. old..
The wiper blades are different sizes for the driver and passenger side of the 2000 Chevrolet Caviler. The correct size for the driver size is a 22 inch blade. The passenger side is a 17 inch blade.
The 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 & 2005 Chevrolet Venture takes 24" replacement windshield wiper blades on both sides front and a 16" rear wiper blade. Note however, when buying wipers be sure to always lookup your vehicle make, model and year in the application guide book at the store
Yes
Something is wrong with your 2000 Chevy Venture. Better information get's better answers.
how do you replace a wiper motor in a 2000 jetta?
Raise the wiper blade and hold. Pull the release on the bottom of the blade and wiggle it off.
My 2000 Chevy venture gets 24- 25 on the highway.
The 2000 Chevrolet Chevy Impala has hook-end wiper arms and are easy to change. See the Sources and Related Links section below for videos on how to change wiper blades as well as what size wiper blades are on the vehicle (correct attachment and lengths). Tip: if you purchase the replacement blades first, there will also be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
The 1996-2000 Dodge Caravan and Grand Caravan takes 28" replacement windshield wiper blades on both sides front and an 18" rear replacement wiper blade.
yes
What is the easiest way to replace the starter motor on a 2000 chev Venture?
The 2000 Toyota Solara has hook-end wiper arms. See the Sources and Related Links section below for wiper blade installation videos and correct attachment/length wiper blade sizes. Also, if you purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through. Very simple.