answersLogoWhite

0

Found after removing and replacing the sensor and bottle still had error finally drained radiator and added correct coolant mixture in radiator, indicator went away. Appear I had a weak mixture of coolant and water in radiator, which kept giving me the "ENGINE COOLANT LOW' I guess it really was low in coolant.

because water pump isnot working properly.if it is with plastic propeler ,it is time to be replasment with new water pump.if not do dis as soon as possible ,next thing wich will become broken is termostat .

Also some times coolant sensor under the bottle where you fill coolant is not attached correctly or is not working.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Where is coolant cap in 1999 jaguAr xj8?

In the 1999 Jaguar XJ8, the coolant cap is located on the engine's coolant reservoir, which is situated near the front of the engine bay on the driver's side. Look for a plastic tank with a cap labeled for coolant. Ensure the engine is cool before removing the cap to avoid injury from hot coolant.


Where is your engine coolant tank on your Jaguar Xj8?

The engine coolant tank on a Jaguar XJ8 is typically located in the engine bay, near the front of the vehicle. It is usually a translucent plastic reservoir marked with a coolant level indicator. To access it, you may need to open the hood and look for the tank near the radiator or on the driver's side of the engine compartment. Always ensure the engine is cool before checking or adding coolant.


What type of coolant does a 2001 jaguar xj8 use?

Dexcool


How do you set the timing on a 1999 jaguar XJ8 engine?

where are thev timing markson a 1999 xj8 jaguar


Where is the coolant drain plug for 2001 jaguar XJ8?

The coolant drain plug for a 2001 Jaguar XJ8 is located on the engine block, typically on the lower side, near the water pump. It can be accessed from underneath the vehicle, so make sure to use caution while working under the car. Always ensure the engine is cool before attempting to drain the coolant, and be prepared to catch any fluid that drains out.


How do you replace the AT coolant hose on a 1999 Jaguar XJ8?

To replace the AT coolant hose on a 1999 Jaguar XJ8, first, ensure the engine is cool and disconnect the negative battery terminal. Drain the transmission fluid and coolant, then locate the AT coolant hose, which runs from the transmission to the radiator. Loosen the clamps and carefully remove the old hose, then replace it with the new one and secure it with the clamps. Refill the transmission and coolant systems with the appropriate fluids, and reconnect the battery terminal before starting the engine to check for leaks.


What coolant capacity 1999 jaguar xj8?

10 quarts according to owner manual


Where is the temperature coolant sensor located in a 2004 XJ8 jaguar?

In a 2004 Jaguar XJ8, the temperature coolant sensor is typically located near the thermostat housing, which is situated at the front of the engine. It is usually mounted on the engine block or cylinder head. To access it, you may need to remove other components, such as the air intake or engine covers, depending on the specific setup of the vehicle. Always consult the vehicle’s service manual for precise details and instructions.


How do you replace thermostat on jaguar xj8?

To replace the thermostat on a Jaguar XJ8, first ensure the engine is cool and disconnect the battery. Drain the coolant and remove the necessary components to access the thermostat housing, typically located near the engine block. Take out the old thermostat and gasket, clean the mating surfaces, and install the new thermostat with a new gasket. Finally, reassemble everything, refill the coolant, and check for leaks before starting the engine.


How do I refill antifreeze on 1998 Jaguar XJ8?

To refill the antifreeze on a 1998 Jaguar XJ8, first ensure the engine is cool and locate the coolant reservoir, which is typically near the front of the engine bay. Remove the cap and check the coolant level; if it's low, use a mix of proper coolant and distilled water (usually a 50/50 ratio) to fill it to the recommended level. After refilling, securely replace the cap, start the engine, and let it run for a few minutes to circulate the coolant, checking for any leaks. Always consult the owner’s manual for specific instructions and coolant specifications.


How do you replace AT coolant hose on 1999 Jaguar XJ8?

To replace the AT coolant hose on a 1999 Jaguar XJ8, first ensure the engine is cool and disconnect the battery. Remove any necessary components for access, such as the air intake or engine covers. Then, locate the AT coolant hose, use pliers to loosen the clamps, and carefully remove the old hose. Install the new hose by securing it with clamps, reassemble any removed components, and reconnect the battery before checking for leaks.


What is the engine oil capacity of a 2001 jaguar xj8?

7 litres