0
If the AC heater in a GMC G2500 van isn't turning on, it could be due to several issues. Common causes include a blown fuse, a faulty blower motor, or a problem with the climate control system. Additionally, low refrigerant levels or a malfunctioning thermostat can prevent the AC from operating. It's advisable to check these components or consult a mechanic for a thorough diagnosis.
What else can I help you with?
How much the tank holds on a g2500?
my 1984 GMC vandura G2500 had a 33 gallon tank
What is G2500 GMC verses C2500 GMC?
A G2500 is a 3/4 ton van and a C2500 is a 2 wheel drive 3/4 ton pickup.
How fast does a 89 gmc g2500 vandura go?
A G2500 is a 4.3 L 150 hp V6 brand new. so not very fast definately under 100 mph
Location for 1994 GMC Vandura G2500 abs speed sensor?
It should be on top of the rear differential.
Where is the ignition relay on a 1992 GMC G2500 conversion van?
That 92 GMC van doesn't have a relay for ignition. Power for the ignition is supplied from the ignition switch.
How much does a 88 gmc g2500 weigh?
The weight of a 1988 GMC G2500 varies depending on its configuration and options, but it typically ranges from approximately 4,300 to 5,500 pounds. This range accounts for different body styles and equipment levels. For precise specifications, it's best to consult the owner’s manual or the vehicle's documentation.
Where is the wiper motor on a 1995 gmc g2500 vandura?
The wiper motor on a 1995 GMC G2500 Vandura is typically located under the dashboard on the driver's side. It is mounted to the firewall, near the base of the windshield. Accessing it may require removing the wiper arms and possibly the plastic cover that conceals the motor. Always refer to the vehicle's service manual for specific details and diagrams.
Where is the Fuel pump relay 1987 gmc g2500?
In a 1987 GMC G2500, the fuel pump relay is typically located in the under-hood fuse and relay box. This box is usually situated near the battery on the driver's side of the engine compartment. You may need to consult the vehicle's service manual for the exact relay layout and identification, as the positioning can vary slightly depending on the specific configuration.
Where is the thermostat on a GMC vandura?
follow the upper rad hose from the radiator to the engine, it should be in the part that the upper hose connects to and bolted to the engine (if memory serves), this based on a g2500 with a 5.7
What type of transmission did your gmc g2500 vandura come out with?
The GMC G2500 Vandura typically came equipped with either a 3-speed automatic transmission or a 4-speed manual transmission, depending on the model year and configuration. The automatic transmission was often the Turbo Hydra-Matic, which provided smoother shifting and improved performance. The choice of transmission could vary based on the engine option selected and the intended use of the vehicle. Always refer to specific model documentation for precise details.
How do you take off a flywheel out of a 1991 gmc g2500 5.7 ltr vandura?
disconnect the trans slide back - disconnect torque converter clear flywheel get two 5/8 socket wrenchs and use one to loosen and one to tighten do that till all of them is loose and then tap at the bottom and turn as you tap to remove the flywheel
The diagram for a serpentine belt for a 1995 G2500 gmc vandura?
The serpentine belt diagram for a 1995 GMC Vandura G2500 typically shows the routing path of the belt around various pulleys, including the alternator, power steering pump, water pump, and crankshaft pulley. It’s essential to follow the correct path to ensure proper function of the engine components. You can usually find this diagram on a sticker under the hood or in the vehicle's service manual. If in doubt, consult a repair guide or a professional mechanic for assistance.
