GANG capacitor is called so because it group of capacitor
Gang capacitors are commonly used in radio tuners/receivers. Radio tuners/receivers have formation of LC(inductance and capacitor). Here this circuit has one fixed inductance and capacitor parallel with gang capacitor. Normally gang capacitor used in superhetrodyne receiver.
Because they are Ganged ( Grouped ) together , such that they can be tuned through a single tuner.
In a radio receiver, a gang condenser is a type of air capacitor
when the DC current flows through the capacitor .the leakage of the charges is in capacitor called Dc leakage capacitor .
it is so called as the voltage across capacitor is given by dvc/dt so the circuit differentiates
Gang capacitor is used along with an inductor coil(L) in a LC circuit to tune to a particular frequency which is to be received. The frequency of a LC combination is given by the formula f=1/(2*pi*L*C). here f is the frequency to be received. L is the inductance. C is the capacitance. The capacitance(C) of the Gang capacitor can be varied to tune to different frequencies. I recently made my college project in which I used Gang capacitor in a FM receiver circuit. The received signal was decoded and sent to a micro-controller and then to a computer. I hope this is of sm help to u! VISHESH Delhi, India.
A: In the old radios the tuning was done by meshing aluminum plates in-out to achieve different capacity and the plates were many therefore gang for ganged together
The capacitor is called a bypass capacitor , it provides a low impedence path for AC emitter current to groun.
Kondensator
Yes there is an Austrailian bikie gang called the Finks
The units of capacitance are called farads. A one farad capacitor is a capacitor with 1 volt potential difference with 1 coulomb of charge on the capacitor, C = Q/V or Q=CV So the charge held on your capacitor is Q = CV = 9Volts * 0.40*10-6Farads=3.6*10-6 Coulombs
the chain gang or the cenation